Error And Status Indicate On The Control Panel; Codes On The Screen - Ricoh SP 110 SU User Manual

8. Troubleshooting

Error and Status Indicate on the Control Panel

Codes on the Screen

• If "C", or "c" appears, contact your sales or service representative.
Code
E0 A paper jam has occurred in the
machine.
E1 Paper has been jammed in the paper
tray.
The input tray has run out of paper.
E3 A maintenance cover is open.
E4 Front cover is closed.
E5 An appropriate size paper for printing
Report is not loaded.
E6 The print cartridge has not been
installed.
E9 An appropriate size paper for making
copies is not loaded.
P1 The paper size set for the document
differs from the size of the paper.
P2 The paper type set for the document
differs from the type of the paper.
74
Causes Solutions
• Remove the jammed paper. See
page 64 "Paper Feed Problems".
• Remove the jammed paper. See
page 64 "Paper Feed Problems".
• Load paper to the input tray. See
page 25 "Loading Paper".
Close the maintenance cover completely.
Open the front cover completely.
Load the appropriate size paper.
Reinstall the print cartridge. See page 57
"Replacing the Print Cartridge".
Load the appropriate size paper.
• Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
• If [Auto Continue:] is set to [0 sec], no
error message appears.
• Press the [Start] key to begin printing, or
press the [Stop/Clear] key to cancel the
job.
• If [Auto Continue:] is set to [0 sec], no
error message appears.