Adjusting The Position Of Printed Images - Ricoh Priport JP5500 Operating Instructions Manual

Operation

Adjusting the Position of Printed Images

Use the following procedure to adjust
the position of print images as re-
1
quired.
* Paper feed direction
Limitation
❒ For 308 mm, 12.2"-width paper,
you can only adjust the position of
the print image 5 mm, 0.2" up or
down.
Note
❒ When the main switch is turned
off, the position returns to the de-
fault.
A A A A
Press the [Image =
Note
❒ You can skip step A and adjust
the image position directly by
pressing the { { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } ,
and { { { { { { { { } } } } keys.
24
= ] key.
= =
B B B B
Adjust image position using the
{ { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } , and { { { { { { { { } } } } keys.
Note
❒ When you shift the image for-
ward, leave a 10mm, 0.4" mar-
gin at the leading edge. If there
is no margin, paper might wrap
around the drum and cause a
misfeed.
❒ The { { { { ~ ~ ~ ~ } } } } and { { { { } } } } } } } } keys shift the
image up to 15mm, 0.6" each
way in 0.5mm, 0.02" steps.
❒ The { { { { | | | | } } } } and { { { { { { { { } } } } keys shift the
image up to 10mm, 0.4" each
way in 0.5mm, 0.02" steps.
C C C C
Press the [OK] key.
D D D D
Press the { { { { Proof} } } } key to check the
image position.