Precautions For Wiring; Wiring To The Power Connector And The Terminal Block - Panasonic MINAS A6B Series Reference Specifications

8-3 Precautions for wiring

8-3-1 Wiring to the power connector and the terminal block

Size A, B 100 V / 200 V
 Connection of a regenerative resistor
Short wire
Size
(accessory)
A
None
B
* The circuit connected to terminal X1 – X7 are secondary circuits. (See [ 5. Appearance and name of each part ])
Insulation is needed against the primary side power supply (power supply of the motor brake).
Please do not connect them with the same power supply.
* For details, refer to 7-1 Power connector XA, XB, XC, XD, and terminal block.
R2.0
Internal
regenerative In case of using the external
resistor
regenerative resistor
Between P and B:
None Connect the external
regenerative resistor.
Connection of connector XB
In case of not using the external
Between P and B:
Keep open
Industrial Device Solution Business Unit, Panasonic Corporation
No. SX-DSV03335 - 51-
regenerative resistor