Panasonic MINAS A6B Series Reference Specifications page 103

PARAMETER
Default
Cate Pr. Parameter Cate
value
2
0 Adaptive filter mode setup 0
1 1st notch frequency 5000
2 1st notchwidth selection 2
3 1st notch depth selection 0
4 2nd notch frequency 5000
5 2nd notch width selection 2
6 2nd notch depth selection 0
7 3rd notch frequency 5000
8 3rd notch width selection 2
9 3rd notch depth selection 0
10 4th notch frequency 5000
11 4th notch width selection 2
12 4th notch depth selection 0
Selection of damping filter
13 0
switching
14
1st damping frequency 0
*1
15
1st damping filter setup 0
*1
16
2nd damping frequency 0
*1
17
2nd damping filter setup 0
*1
18
3rd damping frequency 0
*1
19
3rd damping filter setup 0
*1
20
4th damping frequency 0
*1
21
4th damping filter setup 0
*1
22
Size A-C 9.2
Command smoothing filter
*1 Size D-H 13.9
23
Command FIR filter 1.0
*1
24 5th notch frequency 5000
25 5th notch width selection 2
26 5th notch depth selection 0
27 1st damping width setting 0
28 2nd damping width setting 0
29 3rd damping width setting 0
30 4th damping width setting 0
*1 When checking directly value of parameter-file with a text data etc., it does not show the decimal point. Ex) Pr6.24 Load change compensation filter ･･･ Value of Panaterm ： 0.53 / Value of parameter-file ： 53
* Parameter names in the table correspond to the DD motor (rotary type). For parameter names and setting values corresponding to linear motors, refer to the technical document.
MODEL MINAS-A6B(BL/BM) series
Default
Pr. Parameter Cate
value
2 31 For Manufacturer use 0
32 For Manufacturer use 0
33 For Manufacturer use 0
34 For Manufacturer use 0
35 For Manufacturer use 0
36 For Manufacturer use 0
37 For Manufacturer use 0
Default
Pr. Parameter Cate Pr.
value
Default
Parameter Cate Pr. Parameter
value
No.SX-DSV03335
3/11
Default
value