Number of ferrite cores for EMC certification test
Symbol
Location
Power
NF1
supply
able
Motor
NF2
cable
* 1 Power supply cables (L1, L2, L3 ) should be wound together for one circle.
Motor cables (U, V, W ) should be wound together for one circle. 1 circle (bypass 1 line)
* 2 Please wind the power supply cables (L1, L2, L3) for one circle separately.
Please wind the motor cables (U, V, W ) for one circle separately. 1 circle (bypass 1 line)
* 3 Power supply cables (L1, L2, L3) should be wound together for four circles.
Motor cables (U, V, W) should be wound together for Four circles.
If cables cannot be laid down by four circles, two separate ferrite coils should be used to circle two cables s separately.
* 4 Motor cables (U, V, W ) should be wound together and bypass two ferrite coils of parallel connection. 1 circle (bypass 1 line)
R2.0
Applicable Size of
servo driver
(100 V) C
(200 V) C,D
(100 V) A,B
(200 V) A,B,E
(400 V) D,E,F
(200 V) G,H
(100 V) A,B,C
(200 V) A,B,C,D,E
(400 V) D,E,F
(200 V) F
(200V ) G,H
Option part number
Manufacturer's
DV0P1460
ZCAT3035-1330
DV0P1460
ZCAT3035-1330
-
DV0P1460
ZCAT3035-1330
DV0P1460
ZCAT3035-1330
-
Industrial Device Solution Business Unit, Panasonic Corporation
No. SX-DSV03335 - 78-
Number
part number
No need
1
3
RJ8095
1
1
2
3
T400-61D
1