Open-Q 820 Μsom Development Kit; Introduction; Development Platform Notice; Anti-Static Handling Procedures - Intrinsyc Open-Q 820 User Manual

Open-Q™ 820 (APQ8096) / 820Pro (APQ8096SG) µSOM Development Kit User Guide Version 1.4
3. OPEN-Q 820 µSOM DEVELOPMENT KIT

3.1 Introduction

The Open-Q 820 / 820Pro µSOM provides a quick reference or evaluation platform for
Qualcomm's latest 820 series - Snapdragon
Linux application developers, OEMs, consumer manufacturers, hardware component
vendors, video surveillance, robotics, camera vendors, and flash chip vendors to evaluate,
optimize, test and deploy applications that can utilize the Qualcomm® Snapdragon™ 820
series technology.

3.2 Development Platform Notice

This development platform contains RF/digital hardware and software intended for
engineering development, engineering evaluation, or demonstration purposes only and is
meant for use in a controlled environment. This device is not being placed on the market,
leased or sold for use in a residential environment or for use by the general public as an end
user device.
This development platform is not intended to meet the requirements of a commercially
available consumer device including those requirements specified in the European Union
directives applicable for Radio devices being placed on the market, FCC equipment
authorization rules or other regulations pertaining to consumer devices being placed on the
market for use by the general public.
This development platform may only be used in a controlled user environment where
operators have obtained the necessary regulatory approvals for experimentation using a
radio device and have appropriate technical training. The device may not be used by
members of the general population or other individuals that have not been instructed on
methods for conducting controlled experiments and taking necessary precautions for
preventing harmful interference and minimizing RF exposure risks. Additional RF exposure
information can be found on the FCC website at

3.3 Anti-Static Handling Procedures

The Open-Q 820 / 820Pro µSOM Development Kit has exposed electronics and chipsets.
Proper anti-static precautions should be employed when handling the kit, including but not
limited to:
• Using a grounded anti-static mat
• Using a grounded wrist or foot strap

3.4 Kit Contents

The Open-Q 820 / 820Pro µSOM Development Kit includes the following:
o Open-Q 820 µSOM with Snapdragon
Open-Q 820Pro µSOM with Snapdragon
820 processor. This kit is suited for Android /
™
http://www.fcc.gov/oet/rfsafety/
9
Copyright Intrinsyc Technologies Corporation
APQ8096 processor or
™
APQ8096SG processor
™