Full Spectrum Laser MUSE 3D Operation Manual page 72

creates deeper cuts. Note that if you delete a vector line (by clicking "-"), set passes to "0" first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
Passes
Passes
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes creates
creates deeper cuts. Note that if you delete a vector line (by clicking "-"), set passes to "0" first.
of the raster.
deeper cuts. Note that if you delete a vector line (by clicking "-"), set passes to "0" first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
Show All Parameters
Basic Vector Cutting Example
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
This toggle switch displays or hides all possible vector tag as a series of color options. Often when performing
of the raster.
both vector cuts and raster engraving, it is a good idea to change the color of the vector cut to something other
than black. This will avoid the laser detecting the vector cut as part of the raster.
Basic Vector Cutting Example
Basic Vector Cutting Example
Vector Marking Example
Vector Marking Example
Vector Marking Example
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will instruct the
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
laser using our vector properties In this design, the blue lines will not be cut through on our material, but We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
instead will be marked, as the red outline still cuts. Combining Vector and Raster
our material, but instead will be marked, as the red outline still cuts.
our material, but instead will be marked, as the red outline still cuts.
Combining Vector and Raster
Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to engrave
Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to
an image, and then cut the image out with a vector outline. In this case the laser will raster in the black fill and
engrave an image, and then cut the image out with a vector outline. In this case the laser will raster in
cut the red line.
the black fill and cut the red line.
creates deeper cuts. Note that if you delete a vector line (by clicking "-"), set passes to "0" first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
Passes
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
This allows the operator to assign how many times the laser will complete a full cycle. Adding passes
of the raster.
creates deeper cuts. Note that if you delete a vector line (by clicking "-"), set passes to "0" first.
Show All Parameters
This toggle switch displays or hides all possible vector tag as a series of color options. Often
Basic Vector Cutting Example
when performing both vector cuts and raster engraving, it is a good idea to change the color of the
vector cut to something other than black. This will avoid the laser detecting the vector cut as part
of the raster.
Basic Vector Cutting Example
Vector Marking Example
Vector Marking Example
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
We can outline (as opposed to fill) parts of the pattern for a second design option. Again, we will
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
instruct the laser using our vector properties In this design, the blue lines will not be cut through on
our material, but instead will be marked, as the red outline still cuts.
our material, but instead will be marked, as the red outline still cuts.
Combining Vector and Raster
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Engravings can be combined with vector cuts to create a variety of outcomes. A simple example is to
engrave an image, and then cut the image out with a vector outline. In this case the laser will raster in
the black fill and cut the red line.
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
70
70
70
70
71