Full Spectrum Laser MUSE 3D Operation Manual page 13

Hide thumbs Also See for MUSE 3D:
Table of Contents

Advertisement

Section III. Installation & Assembly
1. Locate & Remove Zip Ties
Assembly Stage 1: Remove Zip Ties
To secure the machine during shipping, yellow zip ties are used to hold the laser head assembly and
the x-gantry. These zip ties must be removed before operating your laser cutter for the first time.
1. Locate Yellow Zip Ties: Yellow zip ties secures the laser head and x-gantry during shipping. Open
the lid and identify all yellow zip ties.
2 .Cut and Remove Yellow Zip Ties: Using a small pair of scissors (nail cutters work remarkably well),
carefully cut and remove all yellow zip ties.
NOTICE
Do not cut any other cord or wire. Be aware that the glass laser tube is
extremely fragile. Be careful NOT to damage any part of the machine during
this process.
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com
702-802-3103
12

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MUSE 3D and is the answer not in the manual?

Table of Contents