Full Spectrum Laser MUSE 3D Operation Manual page 44

RetinaEngrave v3.0 Software
Edit (Continued)
Cut (Ctrl+X): Selected object or item is removed.
Copy (Ctrl+C): Copy some portion of an object or item.
Paste (Ctrl+V): Paste a copied or cut portion of an object or item.
Delete (Del): Delete selected object or item.
Paste In Place (Shift+Ctrl+V): Paste a copied object or item in same location.
Paste Inside Selection: Paste a copied object or item inside selected area.
Paste Style (F4): Paste and match style.
Duplicate (Ctrl+D): Create a copy of a selected object.
Clone (Shift+Ctrl+D): Create an exact copy or 'clone' of an object.
Select All (Ctrl+A): Select all items in work screen.
Deselect All (Shift+Ctrl+D): All items in work screen are deselected.
Invert Selection (Ctrl+I): Items previously selected are now unselected and items unselected are selected.
Select by Font Type: Select item by font type.
Settings: Displays settings menu.
Materials...
Activate user profiles
Modify
Arrange
Send to Front (Shift+Ctrl+Up): Send an object to the front layer.
Bring Forward (Ctrl+Up): Send an object one layer forward.
Send Backward (Ctrl+Down): Send an object one layer backwards.
Send to Back (Shift+Ctrl+Down): Send an object to the back layer.
Align
Align Left: Align object to the left.
Align Center: Align object to center.
Align Right: Align object to right.
Align Top: Align object to top.
Align Middle: Align object to middle.
Align Bottom: Align object to bottom.
Same Width: All selected objects convert to same width.
Same Height: All selected objects convert to the same height.
Distribute Horizontally: Evenly arrange selected objects horizontally.
Distribute Vertically: Evenly arrange selected objects vertically.
Snap to Full Units: Snap to grid as full units.
Snap to Half Units: Snap to grid as half units.
Transform
Rotate 45° Left: Rotate selected object left 45°.
Rotate 90° Left: Rotate selected object left 90°.
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
• 702-802-3103
47
43