Safety Override Lid Failsafe - Full Spectrum Laser MUSE 3D Operation Manual

Section V. Touch Screen Interface

Safety Override Lid Failsafe

Safety Override Lid Failsafe Safety Override Lid Failsafe
As a safety feature, the lid has a magnetic failsafe that disconnects the laser when the lid is As a safety feature, the lid has a magnetic failsafe that disconnects the laser when the lid is
As a safety feature, the lid has a magnetic failsafe that disconnects the laser when the lid is open. this will be
open. open.
indicated by your touch screen display like so.
this will be indicated by your touch screen display like so. this will be indicated by your touch screen display like so.
Figure 5.2 Figure 5.2
Be sure your lid is closed when you try to fire the laser. If the lid is closed and the laser still does not fire, check
that the lid magnet is touching the proper base magnet and that wires are connected.
Be sure your lid is closed when you try to fire the laser. If the lid is closed and the laser still does not Be sure your lid is closed when you try to fire the laser. If the lid is closed and the laser still does not
fire, check that the lid magnet is touching the proper base magnet and that wires are connected. fire, check that the lid magnet is touching the proper base magnet and that wires are connected.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com. Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com
Figure 5.3
• 702-802-3103
Figure 5.3
41 41
37