Full Spectrum Laser Muse 3D Laser System - Full Spectrum Laser MUSE 3D Operation Manual

Full Spectrum Laser Muse 3D Laser System

Congratulations on your purchase of a Full Spectrum Laser Muse 3D Laser System. With proper usage and
upkeep, your laser cutter should provide years of productive output. This user manual will guide you through
the safety guidelines and operation of your machine. It is recommended that you familiarize yourself with this
manual before using your laser cutter.
For more information and product selection, please visit
Laser Head
Camera
Honeycomb Tray
Ethernet Port
Compliance Statement The Full Spectrum Laser MUSE 3D Laser System is a class 3R laser product, as defined in International Standard IEC 608251.
The Full Spectrum Muse 3D complies with 21 CFR 1040.10 and 1040.11, the Federal Performance Standards for Light Emitting Products, except for
deviations pursuant to Laser Notice No. 50, dated July 16, 2001. The Center for Devices and Radiological Health of the US FDA issued Laser Notice
No. 50 to permit manufacturers to classify and manufacture their products in accordance with the International Standard. 21 CFR 1040 and IEC 608251
require that certification, identification and warning labels be placed on laser products. Reproductions of the labels found on the Full Spectrum Hobby
Advanced Laser System follow, with locations specified:
Side View
Cooling Vents
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com
www.fslaser.com
Top View
Air Inlet
Power On/Off Air Inlet
Power Supply
• 702-802-3103
40/45 Watt Laser Tube
X-Gantry
20" x 12" Engraving Area
Touch Screen
Pause/Stop Button
Back View
Exhaust Fan / Flange
Water Outlet
Water Inlet
2