Full Spectrum Laser MUSE 3D Operation Manual page 53

RetinaEngrave v3.0 Software
Raster Properties Window
Raster Properties Window
Raster Properties Window
Raster Properties Window
Raster Properties Window
Video Feed (I)
Use this window to view realtime display.
Halftone Dither: Apply Halftone Dither.
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Halftone Dither: Apply Halftone Dither.
Blur: Adjust blur filter radius from 0 to 30.
Halftone Dither: Apply Halftone Dither. Threshold: Apply Threshold.
Jog Controls (J)
Blur: Adjust blur filter radius from 0 to 30.
Threshold: Apply Threshold.
Edge: Adjust edge enhancement threshold from 0 to 30.
Threshold: Apply Threshold. Blur: Adjust blur filter radius from 0 to 30.
Edge: Adjust edge enhancement threshold from 0 to 30.
Blur: Adjust blur filter radius from 0 to 30.
Intensity: Adjust intensity from -255 to 255.
Blur: Adjust blur filter radius from 0 to 30. Edge: Adjust edge enhancement threshold from 0 to 30.
This tool is for moving the culminator and
Intensity: Adjust intensity from -255 to 255.
Edge: Adjust edge enhancement threshold from 0 to 30.
Invert: Reverse Black and White elements.
Edge: Adjust edge enhancement threshold from 0 to 30. Intensity: Adjust intensity from -255 to 255.
camera along the Z-Axis (up and down)
Invert: Reverse Black and White elements.
Intensity: Adjust intensity from -255 to 255.
Resolution: Set resolution (250, 500, 1000 dpi).
Invert: Reverse Black and White elements. Intensity: Adjust intensity from -255 to 255.
Resolution: Set resolution (250, 500, 1000 dpi).
Invert: Reverse Black and White elements.
Poser %: Select power percentage from 1 to 100.
Invert: Reverse Black and White elements. Resolution: Set resolution (250, 500, 1000 dpi).
Resolution: Set resolution (250, 500, 1000 dpi). Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
Resolution: Set resolution (250, 500, 1000 dpi).
Poser %: Select power percentage from 1 to 100.
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
255.
Speed%: Select speed percentage from 1 to 100. B/W Threshold: Select black and white threshold from 0 to
B/W Threshold: Select black and white threshold from 0 to
255.
Indicators (Bottom Row)
B/W Threshold: Select black and white threshold from 0 to 255.
Indicators (Bottom Row)
255.
Indicators (Bottom Row)
255.
Indicators (Bottom Row)
Indicators (Bottom Row)
Indicators (Bottom Row)
Position Indicator: Displays current position of the laser on the grid.
Position Indicator: Displays current position of the laser on the grid.
Position Indicator: Displays current position of the laser on the grid.
Position Indicator: Displays current position of the laser on the grid.
Position Indicator: Displays current position of the laser on the grid.
Position Indicator: Displays current position of the laser on the grid.
Time Remaining Indicator: Displays the time remaining to complete the current job
Time Remaining Indicator: Displays the time remaining to complete the current job
Time Remaining Indicator: Displays the time remaining to complete the current job
Time Remaining Indicator: Displays the time remaining to complete the current job
Time Remaining Indicator: Displays the time remaining to complete the current job
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator: Notifies you of the last workspace update operation results. "Press Sync" to sync immediately. The workspace
Sync Indicator:
Sync Indicator:
Sync Indicator:
will update automatically, periodically.
Sync Indicator:
Sync Indicator:
Machine Indicators: Displays information on connected devices.
Machine Indicators: Displays information on connected devices.
Machine Indicators: Displays information on connected devices.
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Device Connection Available:
Machine Indicators: Displays information on connected devices. Lid Indicator: Tells operator if lid is open or closed. Device Connection Available: Indicates connection to machine is successful.
Device Connection Available:
Lid Indicator: Tells operator if lid is open or closed.
Lid Indicator: Tells operator if lid is open or closed.
Device Connection Available: Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
(E)
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
60
• 702-802-3103
47
60
60
60
60
52