Full Spectrum Laser MUSE 3D Operation Manual page 60

basic shape library includes line, rectangle, ellipse, polygon, triangle and star. You can modify any
shape by clicking on it and then adjusting the interface data appearing on the right side of the screen.
Each shape will have slightly different options as follows:
RetinaEngrave v3.0 Software
Line (L)
Bevel: Create beveled corners.
Inset: Create inset corners.
Closed:
Fancy: Create fancy corners
Autoscale Corners:
Autoscale Corners: Toggle autoscale corners on and off.
Uniform Corners: Click to ensure all corners have the same
Rectangle (R)
parameters.
Round: Create rounded corners.
Ellipse (E)
Ellipse (E)
Round2: Create inverted rounded corners.
Angles: Input custom angles
Bevel: Create beveled corners.
Shape:
Open: Click for open ellipse.
Inset: Create inset corners.
Closed: Click for closed ellipse.
Fancy: Create fancy corners
Ellipse (E)
Pie: Click for pie shaped ellipse.
Autoscale Corners: Toggle autoscale corners on and off.
Uniform Corners: Click to ensure all corners have the same parameters.
Angles: Input custom angles
Shape
Open: Click for open ellipse.
Closed: Click for closed ellipse.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Pie: Click for pie shaped ellipse.
Triangle, Polygon & Star
Angles: Input custom angles
Points: Slide bar to create polygons with multiple points (3 to 25).
Shape
Triangle, Polygon & Star
Corner: Slide bar to curve corners
Open: Click for open ellipse.
Closed: Click for closed ellipse.
Pie: Click for pie shaped ellipse.
Triangle, Polygon & Star
Points: Slide bar to create polygons with multipoints (3 to 25).
Advanced Settings
Corner: Slide bar to curve corners
Round: Create rounded corners.
Advanced Settings: Clicking the icon opens a new popup window.
Round2: Create inverted rounded corners.
Bevel: Create beveled corners.
Advanced Settings
Inset: Create inset corners.
Points: Slide bar to create polygons with multipoints (3 to 25).
Fancy: Create fancy corners
Corner: Slide bar to curve corners
Autoscale Corners: Toggle autoscale corners on and off.
Uniform Corners: Click to ensure all corners have the same parameters.
Advanced Settings: Clicking the icon opens a new popup window.
Plain Edges: Toggle plain edges on and off.
Corners: Input outside and inside corner curvature.
Advanced Settings
Radius: Input outside and inside corner radius.
Angles: Input outside and inside corner angles.
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Ellipse (E)
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Angles: Input custom angles
Shape
Open: Click for open ellipse.
Closed: Click for closed ellipse.
Pie: Click for pie shaped ellipse.
Triangle, Polygon & Star
Points: Slide bar to create polygons with
Corner: Slide bar to curve corners
Advanced Settings: Clicking the icon op
Advanced Settings
• 702-802-3103
47
76
59