Reset Button And Wlan; Web Configurator Main Screen; Figure 10 Main Screen - ZyXEL Communications Network Device P-2302 User Manual

Chapter 2 Introducing the Web Configurator
1 Make sure the POWER LED is on and not blinking.
2 ress and hold the RESET button for ten seconds. Release the RESET button when the
P
POWER LED begins to blink. The default settings have been restored.
If the ZyXEL Device restarts automatically, wait for the ZyXEL Device to finish restarting,
and log in to the web configurator. The password is "1234". You have finished.
If the ZyXEL Device does not restart automatically,
Device's power. Then, follow the directions above again.

2.3.1 Reset Button and WLAN

You can also use the RESET button to turn on/off your wireless network. Press the RESET
button for 1 second to turn on/off the WLAN.

2.4 Web Configurator Main Screen

Figure 10 Main Screen

B
As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - navigation panel
• C - main window
• D - status bar
42
sconnect and reconnect the ZyXEL
di
A
C
D
P-2302HWUDL-P1 Series User's Guide