Figure 34 Bw Mgmt Monitor Window; Table 26 Bw Mgmt Monitor Window - ZyXEL Communications Network Device P-2302 User Manual

Chapter 4 Status Screens

Figure 34 BW MGMT Monitor Window

The types of traffic shown in this screen do not depend on your settings in the
Management Wizard

Table 26 BW MGMT Monitor Window

LABEL
LAN-VoIP (SIP)
LAN-FTP
LAN-E-Mail
LAN-WWW
Default Class
WAN-VoIP (SIP)
WAN-FTP
WAN-E-Mail
Default Class
74
or in Bandwidth MGMT. Each field is described in the following table.
DESCRIPTION
This field displays how much SIP traffic is going to the LAN each second. The rate
is the number of kilobits that went to the LAN one second before the last time the
screen updated (refreshed).
This field displays how much FTP traffic is going to the LAN each second. The rate
is the number of kilobits that went to the LAN one second before the last time the
screen updated (refreshed).
This field displays how much e-mail went to the LAN each second. The rate is the
number of kilobits that went to the LAN one second before the last time the screen
updated (refreshed).
This field displays how much web traffic went to the LAN each second. The rate is
the number of kilobits that went to the LAN one second before the last time the
screen updated (refreshed).
This field displays how much traffic that is not allocated to any sub-class went to
the LAN each second. The rate is the number of kilobits that went to the LAN one
second before the last time the screen updated (refreshed). This might include
SIP traffic, FTP traffic, e-mail, or web traffic, depending on what traffic is allocated
to sub-classes. You can change what traffic is allocated to sub-classes in
Management > Bandwidth MGMT > Class Setup.
This field displays how much SIP traffic went to the WAN each second. The rate is
the number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much FTP traffic went to the WAN each second. The rate
is the number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much e-mail went to the WAN each second. The rate is the
number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much traffic that is not allocated to any sub-class went to
the WAN each second. The rate is the number of kilobits that went to the WAN
one second before the last time the screen updated (refreshed). This might
include SIP traffic, FTP traffic, e-mail, or web traffic, depending on what traffic is
allocated to sub-classes. You can change what traffic is allocated to sub-classes
in Management > Bandwidth MGMT > Class Setup.
Bandwidth
P-2302HWUDL-P1 Series User's Guide