ZyXEL Communications Network Device P-2302 User Manual page 76

Chapter 4 Status Screens
Table 27 Packet Statistics Window
LABEL
Rx Pkts
Collisions
Tx B/s
Rx B/s
Up Time
System Up Time
Poll Interval
Set Interval
Stop
76
DESCRIPTION
This field displays the number of packets the ZyXEL Device has received from the
port.
This field displays the number of collisions detected by the port.
This field displays how quickly the ZyXEL Device has transmitted packets from the
port. The rate is the number of bytes transmitted one second before the last time
the screen updated (refreshed).
This field displays how quickly the ZyXEL Device has received packets from the
port. The rate is the number of bytes received one second before the last time the
screen updated (refreshed).
This is the total amount of time the port has been connected.
This field displays how long the ZyXEL Device has been running since it last
started up. The ZyXEL Device starts up when you plug it in, when you restart it
(Maintenance > Tools > Restart), or when you reset it (see
41).
Enter how often you want the ZyXEL Device to update this screen, and click Set
Interval.
Click this to make the ZyXEL Device update the screen based on the amount of
time you specified in Poll Interval.
Click this to make the ZyXEL Device stop updating the screen.
Section 2.3 on page
P-2302HWUDL-P1 Series User's Guide