System; System Overview; System Name; Domain Name - ZyXEL Communications Network Device P-2302 User Manual

C
H A P T E R
Use this screen to set up general system settings, change the system mode, change the
password, configure the DDNS server settings, and set the current date and time.

22.1 System Overview

22.1.1 System Name

System Name is for identification purposes. However, because some ISPs check this name
you should enter your computer's "Computer Name".
• In Windows 95/98 click Start, Settings, Control Panel, Network. Click the
Identification tab, note the entry for the Computer Name field and enter it as the System
Name.
• In Windows 2000, click Start, Settings and Control Panel and then double-click System.
Click the Network Identification tab and then the Properties button. Note the entry for
the Computer name field and enter it as the System Name.
• In Windows XP, click Start, My Computer, View system information and then click
the Computer Name tab. Note the entry in the Full computer name field and enter it as
the ZyXEL Device System Name.

22.1.2 Domain Name

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave
this blank, the domain name obtained by DHCP from the ISP is used. While you must enter
the host name (System Name) on each individual computer, the domain name can be assigned
from the ZyXEL Device via DHCP.

22.1.3 General System Screen

Use this screen to change the ZyXEL Device's mode, set up the ZyXEL Device's system
name, domain name, idle timeout, and administrator password. To access this screen, click
Maintenance > System > General.
P-2302HWUDL-P1 Series User's Guide
22

System

253