Lan Client List Screen; Figure 58 Network > Lan > Client List; Table 46 Network > Lan > Static Dhcp; Table 47 Network > Lan > Client List - ZyXEL Communications Network Device P-2302 User Manual

Chapter 7 LAN
Each field is described in the following table.
Table 46 Network > LAN > Static DHCP
LABEL
#
MAC Address
IP Address
Apply
Cancel

7.2.4 LAN Client List Screen

This screen is empty if the DHCP server is not enabled. You can enable it in
Network > LAN > DHCP Setup.
Use this screen to look at the IP addresses the ZyXEL Device has assigned to DHCP clients on
the LAN. To access this screen, click Network > LAN > Client List.
Figure 58 Network > LAN > Client List
Each field is described in the following table.
Table 47 Network > LAN > Client List
LABEL
#
IP Address
Host Name
MAC Address
Reserve
Apply
Refresh
112
DESCRIPTION
This field is a sequential value. It is not associated with a specific entry.
Enter the MAC address of the computer to which you want the ZyXEL Device to
assign the same IP address.
Enter the IP address you want the ZyXEL Device to assign to the computer.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
DESCRIPTION
This field is a sequential value. It is not associated with a specific entry.
This field displays the IP address the ZyXEL Device assigned to the computer.
This field displays the system name of the computer to which the ZyXEL Device
assigned the IP address.
This field displays the MAC address of the computer to which the ZyXEL Device
assigned the IP address.
Select this if you always want to assign this IP address to this MAC address. Then,
click Apply. The ZyXEL Device creates an entry in the LAN Static DHCP screen.
See Section 7.2.2 on page 110.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to update this screen with current DHCP client information.
P-2302HWUDL-P1 Series User's Guide