Figure 52 Network > Wan > Advanced; Table 42 Network > Wan > Advanced - ZyXEL Communications Network Device P-2302 User Manual

Chapter 6 WAN
Figure 52 Network > WAN > Advanced
Each field is described in the following table.
Table 42 Network > WAN > Advanced
LABEL
DNS Servers
First DNS Server
Second DNS
Server
Third DNS Server
RIP & Multicast
Setup
RIP Direction
RIP Version
102
DESCRIPTION
DNS (Domain Name System) manages the relationships between domain names
and IP addresses. Without a DNS server, you must know the IP address of the
computer you want to access before you access it.
Select From ISP if your ISP dynamically assigns DNS server information. (In this
case, the ISP assigns the WAN IP address too. See Network > WAN > Internet
Connection.) The field to the right is read-only, and it displays the IP address
provided by your ISP.
Select User-Defined if you have the IP address of a DNS server. You might get it
from your ISP or from your network. Enter the IP address in the field to the right.
Select None if you do not want to use this DNS server. If you select None for all of
the DNS servers, you must use IP addresses to configure the ZyXEL Device and
to access the Internet.
Use this field to control how much routing information the ZyXEL Device sends
and receives on the subnet.
None - The ZyXEL Device does not send or receive routing information on the
subnet.
Both - The ZyXEL Device sends and receives routing information on the subnet.
In Only - The ZyXEL Device only receives routing information on the subnet.
Out Only - The ZyXEL Device only sends routing information on the subnet.
Select which version of RIP the ZyXEL Device uses when it sends or receives
information on the subnet.
RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information.
RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information.
RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information.
P-2302HWUDL-P1 Series User's Guide