5.7 Wireless LAN Advanced Setup
To configure advanced wireless settings, click the Advanced Setup button in the General
screen. The screen appears as shown.
Figure 48 Wireless LAN: Advanced
The following table describes the labels in this screen.
Table 37 Wireless LAN: Advanced
LABEL
Wireless Advanced Setup
RTS/CTS
Threshold
Fragmentation
Threshold
802.11 Mode
Apply
Cancel
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
Enter a value between 0 and 2432.
It is the maximum data fragment size that can be sent. Enter a value between 256
and 2432.
Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate
with the ZyXEL Device.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate
with the ZyXEL Device.
Select 802.11b/g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN
devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL
Device might be reduced.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
Chapter 5 Wireless LAN
93