Dect Base Station Overview; Dect Phone Registration; Figure 78 Dect Base Station Overview - ZyXEL Communications Network Device P-2302 User Manual

10.3 DECT Base Station Overview

Your ZyXEL Device has a built in Digital Enhanced Cordless Telecommunications (DECT)
base station. DECT is an ETSI (European Telecommunications Standards Institute) standard
for digital cordless phones which specifies how they transmit, receive and process data and
voice communication.

Figure 78 DECT Base Station Overview

The DECT base station follows the Generic Access Profile (GAP). GAP (a subset of DECT)
specifies how DECT phones register with a DECT base station. The DECT GAP standard
ensures that two different products (a phone and a base station) from different manufacturers
can work together. Any phone that supports GAP can make and receive calls through the
ZyXEL Device.

10.3.1 DECT Phone Registration

In order to use your DECT phone with the ZyXEL Device, the DECT phone must register with
the ZyXEL Device's DECT base station. Follow these steps to register your DECT phone with
the ZyXEL Device.
1 Press down the DECT base station button (A) on top of your ZyXEL Device for 6 to 11
seconds to put the ZyXEL Device in registration mode.
Registration mode refers to the state of the ZyXEL Device when it is scanning for DECT
phones in its surrounding area. The ZyXEL Device stays in registration mode for 30
seconds.
If you press the DECT base station button for 12 seconds or more, the DECT
base station resets and all previously registered DECT phones must be re-
registered.
P-2302HWUDL-P1 Series User's Guide
Chapter 10 Phone
147