Log Message Descriptions; Table 112 System Error Logs; Table 113 System Maintenance Logs - ZyXEL Communications Network Device P-2302 User Manual

23.3 Log Message Descriptions

The following tables provide descriptions of example log messages.

Table 112 System Error Logs

LOG MESSAGE
WAN connection is down.
%s exceeds the max.
number of session per
host!

Table 113 System Maintenance Logs

LOG MESSAGE
Time synchronization is
successful
Time synchronization failed
WAN interface gets IP: %s
DHCP client IP expired
DHCP server assigns %s
Successful WEB login
WEB login failed
Successful TELNET login
TELNET login failed
Successful FTP login
FTP login failed
NAT Session Table is Full!
Time initialized by Datetime
server: %s
Time initialized by Time
server
Time initialized by NTP
server
Failed to sync with Daytime
server: %s
Failed to sync with Time
server: %s
Failed to sync with NTP
server: %s
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
The WAN connection is down. You cannot access the network
through this interface.
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
DESCRIPTION
The device has adjusted its time based on information from
the time server.
The device failed to get information from the time server.
The WAN interface got a new IP address from the DHCP or
PPPoE server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the device's web configurator
interface.
Someone has failed to log on to the device's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the device via ftp.
Someone has failed to log on to the device via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
The device got the time and date from the Datetime server.
The device got the time and date from the time server.
The device got the time and date from the NTP server.
The device was not able to connect to the Daytime server.
The device was not able to connect to the Time server.
The device was not able to connect to the NTP server.
Chapter 23 Logs
265