Chapter 24 Tools
Table 128 Maintenance > Tools > Configuration
LABEL
File Path
Browse
Upload
Back to Factory
Defaults
Reset
24.2.4 Restore Configuration Screens
Do not turn off the device while configuration file upload is in progress.
When the ZyXEL Device has finished restoring the selected configuration file, the following
screen appears.
Figure 187 Configuration Upload Successful
The device now automatically restarts. This causes a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 188 Network Temporarily Disconnected
276
DESCRIPTION
Enter the location of the file you want to upload, or click Browse... to find it.
Click this to find the file you want to upload.
Click this to restore the selected configuration file. See
276
for more information about this.
Note: Do not turn off the device while configuration file upload
is in progress.
Click this to clear all user-entered configuration information and return the ZyXEL
Device to its factory defaults. There is no warning screen.
Section 24.2.4 on page
P-2302HWUDL-P1 Series User's Guide