Wpa(2) Authentication Screen; Figure 41 Wireless: Wpa(2); Table 34 Wireless: Wpa(2) - ZyXEL Communications Network Device P-2302 User Manual

5.4.4 WPA(2) Authentication Screen

In order to configure and enable WPA Authentication; click the Wireless LAN link under
Network to display the Wireless screen. Select WPA or WPA2 from the Security list.

Figure 41 Wireless: WPA(2)

The following table describes the wireless LAN security labels in this screen.

Table 34 Wireless: WPA(2)

LABEL
Security Mode
WPA Compatible
ReAuthentication
Timer (in seconds)
Idle Timeout
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
Choose WPA or WPA2 from the drop-down list box.
This field is only available for WPA2. Select this if you want the ZyXEL Device to
support WPA and WPA2 simultaneously.
Specify how often wireless stations have to resend usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
The default time interval is 1800 seconds (30 minutes).
Note: If wireless station authentication is done using a
RADIUS server, the reauthentication timer on the
RADIUS server has priority.
The ZyXEL Device automatically disconnects a wireless station from the wired
network after a period of inactivity. The wireless station needs to enter the
username and password again before access to the wired network is allowed.
The default time interval is 3600 seconds (or 1 hour).
Chapter 5 Wireless LAN
87