Figure 15 Connection Wizard > Isp Parameters (Pppoe); Table 8 Connection Wizard > Isp Parameters (Pppoe) - ZyXEL Communications Network Device P-2302 User Manual

Table 7 Connection Wizard > ISP Parameters (Ethernet)
LABEL
Next >
Exit
3.2.3.2 PPPoE
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) standard specifying how a host personal computer
interacts with a broadband modem (for example DSL, cable, wireless, etc.) to achieve access
to high-speed data networks.
You cannot use the
discovered automatically. You must use the screens discussed in
page 95 instead.
Figure 15 Connection Wizard > ISP Parameters (PPPoE)
The following table describes the labels in this screen.
Table 8 Connection Wizard > ISP Parameters (PPPoE)
LABEL
Connection Type
Service Name
User Name
Password
< Back
Next >
Exit
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
Click this to go to the next screen.
Click this to close this screen and return to the main screen.
Connection Wizard
DESCRIPTION
Select PPP over Ethernet.
Enter the PPP service name provided by your ISP. If your ISP did not provide a
service name, leave this field blank.
Enter the user name provided by your ISP.
Enter the password provided by your ISP.
Click this to go to the previous screen.
Click this to go to the next screen.
Click this to close this screen and return to the main screen.
Chapter 3 Wizard Setup
if the PPPoE remote server cannot be
Chapter 6 on
51