Figure 219 Red Hat 9.0: Kde: Network Configuration: Devices - ZyXEL Communications Network Device P-2302 User Manual

Linux
This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.
Make sure you are logged in as the root administrator.
Using the K Desktop Environment (KDE)
Follow the steps below to configure your computer IP address using the KDE.
1 Click the Red Hat button (located on the bottom left corner), select System Setting and
click Network.

Figure 219 Red Hat 9.0: KDE: Network Configuration: Devices

2 Double-click on the profile of the network card you wish to configure. The Ethernet
Device General screen displays as shown.
P-2302HWUDL-P1 Series User's Guide
Appendix D Setting up Your Computer's IP Address
317