Figure 218 Macintosh Os X: Network - ZyXEL Communications Network Device P-2302 User Manual

Appendix D Setting up Your Computer's IP Address
2 Click Network in the icon bar.
• Select Automatic from the Location list.
• Select Built-in Ethernet from the Show list.
• Click the TCP/IP tab.
3 For dynamically assigned settings, select Using DHCP from the Configure list.

Figure 218 Macintosh OS X: Network

4 For statically assigned settings, do the following:
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your gateway in the Router address box.
5 Click Apply Now and close the window.
6 Restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
316
P-2302HWUDL-P1 Series User's Guide