Figure 229 Invalid Parameter Entered: Command Line Example; Figure 230 Valid Parameter Entered: Command Line Example; Internal Sptgen Ftp Download Example - ZyXEL Communications Network Device P-2302 User Manual

Appendix F Internal SPTGEN
DO NOT alter or delete any field except parameters in the Input column.
This appendix introduces Internal SPTGEN. All menus shown in this appendix are example
menus meant to show SPTGEN usage. Actual menus for your product may differ.
Internal SPTGEN File Modification - Important Points to Remember
Each parameter you enter must be preceded by one "="sign and one space.
Some parameters are dependent on others. For example, if you disable the Configured field in
menu 1 (see
If you enter a parameter that is invalid in the Input column, the ZyXEL Device will not save
the configuration and the command line will display the Field Identification Number.
229 on page
value other than "0" or "1" in the Input column of Field Identification Number 1000000
(refer to Figure 228 on page

Figure 229 Invalid Parameter Entered: Command Line Example

field value is not legal error:-1
ROM-t is not saved, error Line ID:10000000
reboot to get the original configuration
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2
The ZyXEL Device will display the following if you enter parameter(s) that are valid.

Figure 230 Valid Parameter Entered: Command Line Example

Please wait for the system to write SPT text file(ROM-t)...
Bootbase Version: V2.02 | 2/22/2001 13:33:11
RAM: Size = 8192 Kbytes
FLASH: Intel 8M *2

Internal SPTGEN FTP Download Example

1 Launch your FTP application.
2 Enter "
3 Get "
computer. The name "
4 Edit the "
this FTP screen to edit.
324
Figure 228 on page 323), then you disable every field in this menu.
324, shown next, is an example of what the ZyXEL Device displays if you enter a
323).
". The command "
bin bin
" file. The command "
rom-t
" is the configuration filename on the ZyXEL Device.
rom-t
" file using a text editor (do not use a word processor). You must leave
rom-t
" sets the transfer mode to binary.
" transfers files from the ZyXEL Device to your
get
P-2302HWUDL-P1 Series User's Guide
Figure