Figure 82 Voip > Phone > Dect Phone; Table 65 Voip > Phone > Dect Phone - ZyXEL Communications Network Device P-2302 User Manual

Figure 82 VoIP > Phone > DECT Phone
Each field is described in the following table.
Table 65 VoIP > Phone > DECT Phone
LABEL
Outgoing Call Use If you select both SIP accounts, the ZyXEL Device tries to use the most recently
SIP1
SIP2
Incoming Call
apply to
SIP1
SIP2
PSTN Line
Base Station
Update
Register PIN
Code
Old PIN Code
New PIN
Code
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
registered SIP account first.
Select this if you want to use the SIP1 account when making outgoing calls with
your DECT phones.
Select this if you want to use the SIP2 account when making calls with your DECT
phones.
If you select more than one source for incoming calls, there is no way to
distinguish between them when you receive phone calls.
Select this if you want to receive phone calls for the SIP1 account on your DECT
phones.
Select this if you want to receive phone calls for the SIP2 account on your DECT
phones.
Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on your DECT phones. (P-2302HWUDL-P1 model only)
Select this to update the PIN code of the DECT phone. The default PIN code is
1234. If you are changing the PIN code for the first time, enter 1234 in the Old PIN
Code field.
Note: When the PIN code changes, phones already registered
with the ZyXEL Device will have to re-register when they
are turned off and turned on again.
Enter the existing PIN code. The PIN code can be from 1 to 4 digits long and is
limited to numbers 0 to 9.
Enter the new PIN code. The PIN code is 1 to 4 digits long and is limited to
numbers 0 to 9.
Chapter 10 Phone
151