Static Route; Static Route Overview; Static Route Screens; Ip Static Route Screen - ZyXEL Communications Network Device P-2302 User Manual

C
H A P T E R
Use these screens to configure static routes in the ZyXEL Device.

16.1 Static Route Overview

Each remote node specifies only the network to which the gateway is directly connected, and
the ZyXEL Device has no knowledge of the networks beyond. For instance, the ZyXEL
Device knows about network N2 in the following figure through remote node Router 1.
However, the ZyXEL Device is unable to route a packet to network N3 because it doesn't
know that there is a route through the same remote node Router 1 (via gateway Router 2). The
static routes are for you to tell the ZyXEL Device about the networks beyond the remote
nodes.

Figure 111 Example of Static Routing Topology

16.2 Static Route Screens

16.2.1 IP Static Route Screen

Use this screen to look at static routes in the ZyXEL Device. To access this screen, click
Management > Static Route > IP Static Route.
P-2302HWUDL-P1 Series User's Guide
16

Static Route

193