Dynamic Dns Overview; Figure 177 Maintenance > System > General; Table 105 Maintenance > System > General - ZyXEL Communications Network Device P-2302 User Manual

Chapter 22 System
Figure 177 Maintenance > System > General
Each field is described in the following table.
Table 105 Maintenance > System > General
LABEL
System Setup
System Name
Domain Name
Administrator
Inactivity Timer
Password Setup
Old Password
New Password
Retype to Confirm Type the new password again.
Apply
Cancel

22.2 Dynamic DNS Overview

Use this screen to set up the ZyXEL Device as a dynamic DNS client.
254
DESCRIPTION
Enter your computer's "Computer Name". This is for identification purposes, but
some ISPs also check this field. This name can be up to 30 alphanumeric
characters long. Spaces are not allowed, but dashes "-" and underscores "_" are
accepted.
Enter the domain name entry that is propagated to DHCP clients on the LAN. If
you leave this blank, the domain name obtained from the ISP is used. Use up to
38 alphanumeric characters. Spaces are not allowed, but dashes "-" and periods
"." are accepted.
Enter the number of minutes a management session can be left idle before the
session times out. After it times out, you have to log in again. A value of "0" means
a management session never times out, no matter how long it has been left idle.
This is not recommended. Long idle timeouts may have security risks. The default
is five minutes.
Enter the current password you use to access the ZyXEL Device.
Enter the new password for the ZyXEL Device. You can use up to 30 characters.
As you type the password, the screen displays an asterisk (*) for each character
you type.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2302HWUDL-P1 Series User's Guide