System Timeout; Remote Management Screens; Www Screen; Telnet Screen - ZyXEL Communications Network Device P-2302 User Manual

Chapter 18 Remote MGMT
• Use the ZyXEL Device's LAN IP address when configuring from the LAN.

18.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyXEL Device automatically logs you out if the management session remains idle for
longer than this timeout period. The management session does not time out when a statistics
screen is polling. You can change the timeout period in the SYSTEM General screen.

18.2 Remote Management Screens

18.2.1 WWW Screen

Use this screen to control HTTP access to your ZyXEL Device. To access this screen, click
Management > Remote MGMT > WWW.
Figure 119 Management > Remote MGMT > WWW
Each field is described in the following table.
Table 95 Management > Remote MGMT > WWW
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel

18.2.2 Telnet Screen

Use this screen to control Telnet access to your ZyXEL Device. To access this screen, click
Management > Remote MGMT > Telnet.
210
DESCRIPTION
Enter the port number this service can use to access the ZyXEL Device. The
computer must use the same port number.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Select Selected to only allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2302HWUDL-P1 Series User's Guide