ZyXEL Communications P-2302HWUDL-P1 Series User Manual
  1. Manuals
  2. Brands
  3. ZyXEL Communications Manuals
  4. Gateway
  5. P-2302HWUDL-P1 Series
  6. User manual
ZyXEL Communications P-2302HWUDL-P1 Series User Manual

ZyXEL Communications P-2302HWUDL-P1 Series User Manual

P-2302hwudl-p1 series 802.11g wireless voip station gateway with built-in dect base station
Hide thumbs Also See for P-2302HWUDL-P1 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
P-2302HWUDL-P1 Series
802.11g Wireless VoIP Station Gateway
with Built-in DECT Base Station
User's Guide
Version 3.60
3/2007
Edition 2
www.zyxel.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-2302HWUDL-P1 Series and is the answer not in the manual?

Questions and answers

Related Manuals for ZyXEL Communications P-2302HWUDL-P1 Series

Summary of Contents for ZyXEL Communications P-2302HWUDL-P1 Series

  • Page 1 P-2302HWUDL-P1 Series 802.11g Wireless VoIP Station Gateway with Built-in DECT Base Station User’s Guide Version 3.60 3/2007 Edition 2 www.zyxel.com...

  • Page 3: About This User's Guide

    Help us help you. Send all User Guide-related comments, questions or suggestions for improvement to the following address, or use e-mail instead. Thank you! The Technical Writing Team, ZyXEL Communications Corp., 6 Innovation Road II, Science-Based Industrial Park, Hsinchu, 300, Taiwan. E-mail: techwriters@zyxel.com.tw P-2302HWUDL-P1 Series User’s Guide About This User's Guide...

  • Page 4: Warnings And Notes

    Syntax Conventions • The P-2302HWUDL-P1 series may be referred to as the “ZyXEL Device”, the “device” or the “system” in this User’s Guide. • Product labels, screen names, field labels and field choices are all in bold font.
  • Page 5 Icons Used in Figures Figures in this User’s Guide may use the following generic icons. The ZyXEL Device icon is not an exact representation of your device. ZyXEL Device Server Telephone P-2302HWUDL-P1 Series User’s Guide Computer Notebook computer DSLAM Firewall Switch...

  • Page 6: Safety Warnings

    • Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord. • Antenna Warning! This device meets ETSI and FCC certification requirements when using the included antenna(s). Only use the included antenna(s). Safety Warnings P-2302HWUDL-P1 Series User’s Guide...
  • Page 7 Safety Warnings This product is recyclable. Dispose of it properly. P-2302HWUDL-P1 Series User’s Guide...
  • Page 8 Safety Warnings P-2302HWUDL-P1 Series User’s Guide...

  • Page 9: Table Of Contents

    Remote MGMT ... 217 UPnP ... 225 Sharing a USB Printer ... 237 File Sharing ... 251 Maintanence and Troubleshooting ... 259 System ... 261 Log ... 269 Tools ... 281 Troubleshooting ... 287 P-2302HWUDL-P1 Series User’s Guide Contents Overview Contents Overview...
  • Page 10 Contents Overview Appendices and Index ... 293 P-2302HWUDL-P1 Series User’s Guide...

  • Page 11: Table Of Contents

    2.3.1 Reset Button and WLAN ... 42 2.4 Web Configurator Main Screen ... 42 2.4.1 Title Bar ... 43 2.4.2 Navigation Panel ... 43 2.4.3 Main Window ... 45 2.4.4 Status Bar ... 45 P-2302HWUDL-P1 Series User’s Guide Table of Contents Table of Contents...
  • Page 12 Part II: Network... 83 Chapter 5 Wireless LAN... 85 5.1 Wireless Network Overview ... 85 5.2 Wireless Security Overview ... 86 5.2.1 SSID ... 86 5.2.2 MAC Address Filter ... 86 5.2.3 User Authentication ... 86 P-2302HWUDL-P1 Series User’s Guide...
  • Page 13 7.1.7 Any IP ... 114 7.2 LAN Screens ... 115 7.2.1 LAN IP Screen ... 115 7.2.2 LAN DHCP Setup Screen ... 116 7.2.3 LAN Static DHCP Screen ... 117 7.2.4 LAN Client List Screen ... 118 P-2302HWUDL-P1 Series User’s Guide Table of Contents...
  • Page 14 9.2.1 Quality of Service (QoS) ... 139 9.3 SIP Screens ... 140 9.3.1 SIP Settings Screen ... 140 9.3.2 Advanced SIP Setup Screen ... 141 9.3.3 SIP QoS Screen ... 145 Chapter 10 Phone ... 147 10.1 Analog Phone Overview ... 147 P-2302HWUDL-P1 Series User’s Guide...
  • Page 15 13.6 Trunking Peer Call Screen ... 173 13.7 Trunking Call Rule Screen ... 175 13.8 VoIP Trunking Example: VoIP to PSTN ... 177 13.8.1 Background Information ... 177 13.8.2 Configuration Details: Outgoing ... 177 P-2302HWUDL-P1 Series User’s Guide Table of Contents...
  • Page 16 Part V: Management ... 199 Chapter 16 Static Route ... 201 16.1 Static Route Overview ... 201 16.2 Static Route Screens ... 201 16.2.1 IP Static Route Screen ... 201 16.2.2 IP Static Route Edit Screen ... 202 P-2302HWUDL-P1 Series User’s Guide...
  • Page 17 19.1.1 How do I know if I'm using UPnP? ... 225 19.1.2 NAT Traversal ... 225 19.1.3 Cautions with UPnP ... 225 19.1.4 UPnP and ZyXEL ... 226 19.2 UPnP Examples ... 226 P-2302HWUDL-P1 Series User’s Guide Table of Contents...
  • Page 18 22.2.1 DNS Server Address Assignment ... 263 22.2.2 Dynamic DNS ... 263 22.2.3 Dynamic DNS Screen ... 263 22.3 Time Setting Overview ... 265 22.3.1 Pre-defined NTP Time Servers List ... 265 22.3.2 Resetting the Time ... 266 P-2302HWUDL-P1 Series User’s Guide...
  • Page 19 Appendix B Pop-up Windows, JavaScripts and Java Permissions ... 301 Appendix C IP Addresses and Subnetting ... 307 Appendix D Setting up Your Computer’s IP Address ... 315 Appendix E SIP Passthrough ... 329 Appendix F Internal SPTGEN ... 331 P-2302HWUDL-P1 Series User’s Guide Table of Contents...
  • Page 20 Table of Contents Appendix G Services... 347 Appendix H Legal Information ... 351 Appendix I Customer Support ... 355 Index... 359 P-2302HWUDL-P1 Series User’s Guide...

  • Page 21: List Of Figures

    Figure 34 Bandwidth Management Wizard > Priority Setup ... 69 Figure 35 Bandwidth Management Wizard > Finish ... 70 Figure 36 Status Screen ... 71 Figure 37 Any IP Table Window ... 74 Figure 38 DHCP Table Window ... 75 P-2302HWUDL-P1 Series User’s Guide...
  • Page 22 Figure 78 DiffServ: Differentiated Service Field ... 139 Figure 79 VoIP > SIP > SIP Settings ... 140 Figure 80 VoIP > SIP > SIP Settings > Advanced ... 142 Figure 81 VoIP > SIP > QoS ... 145 P-2302HWUDL-P1 Series User’s Guide...
  • Page 23 Figure 121 Management > Static Route > IP Static Route > Edit ... 203 Figure 122 Subnet-based Bandwidth Management Example ... 206 Figure 123 Management > Bandwidth MGMT > Summary ... 211 Figure 124 Management > Bandwidth MGMT > Class Setup ... 213 P-2302HWUDL-P1 Series User’s Guide...
  • Page 24 Figure 164 Add Printer Wizard: Printer Driver ... 245 Figure 165 Add Printer Wizard: Use Existing Driver ... 246 Figure 166 Add Printer Wizard: Name Your Printer ... 246 Figure 167 Add Printer Wizard: Printer Sharing ... 247 P-2302HWUDL-P1 Series User’s Guide...
  • Page 25 Figure 206 Pop-up Blocker Settings ... 303 Figure 207 Internet Options: Security ... 304 Figure 208 Security Settings - Java Scripting ... 305 Figure 209 Security Settings - Java ... 305 Figure 210 Java (Sun) ... 306 P-2302HWUDL-P1 Series User’s Guide...
  • Page 26 Figure 236 Invalid Parameter Entered: Command Line Example ... 332 Figure 237 Valid Parameter Entered: Command Line Example ... 332 Figure 238 Internal SPTGEN FTP Download Example ... 333 Figure 239 Internal SPTGEN FTP Upload Example ... 333 P-2302HWUDL-P1 Series User’s Guide...

  • Page 27: List Of Tables

    Table 33 Types of Encryption for Each Type of Authentication ... 87 Table 34 Additional Wireless Terms ... 88 Table 35 Wireless LAN: General ... 89 Table 36 Wireless No Security ... 90 Table 37 Wireless: Static WEP Encryption ... 91 Table 38 Wireless: WPA(2)-PSK ... 92 P-2302HWUDL-P1 Series User’s Guide...
  • Page 28 Table 77 VoIP > Phone Book > Speed Dial ... 165 Table 78 VoIP > PSTN Line > General ... 168 Table 79 Matching Incoming and Outgoing Authentication ... 170 Table 80 Call Rules ... 171 Table 81 VoIP > Trunking > General ... 173 P-2302HWUDL-P1 Series User’s Guide...
  • Page 29 Table 119 System Error Logs ... 273 Table 120 System Maintenance Logs ... 273 Table 121 Access Control Logs ... 274 Table 122 TCP Reset Logs ... 274 Table 123 Packet Filter Logs ... 275 Table 124 ICMP Logs ... 275 P-2302HWUDL-P1 Series User’s Guide...
  • Page 30 Table 158 Menu 21.1 Filer Set #2 ... 342 Table 159 Menu 23 System Menus ... 344 Table 160 Menu 24.11 Remote Management Control ... 345 Table 161 Command Examples ... 346 Table 162 Examples of Services ... 347 P-2302HWUDL-P1 Series User’s Guide...

  • Page 31: Introduction, Wizards And Status

    Introduction, Wizards and Status Introducing the ZyXEL Device (33) Introducing the Web Configurator (39) Wizard Setup (47) Status Screens (71)

  • Page 33: Introducing The Zyxel Device

    Figure 1 ZyXEL Device’s VoIP Features • Peer-to-Peer calls (A) - Use the ZyXEL Device to make a call to the recipient’s IP address without using a SIP proxy server. P-2302HWUDL-P1 Series User’s Guide for a complete list of features for your model.

  • Page 34: Voip Trunking Gateway

    You can also use your DECT phone to make VoIP calls (B). For the PSTN models, you can also make calls via the PSTN line (C). These types of calls are referred to as external calls. P-2302HWUDL-P1 Series User’s Guide...

  • Page 35: Zyxel Device's Usb Support

    This means that probes from the outside to your network are not allowed, but you can safely browse the Internet and download files. P-2302HWUDL-P1 Series User’s Guide Chapter 1 Introducing the ZyXEL Device...

  • Page 36: Ways To Manage The Zyxel Device

    If you backed up an earlier configuration file, you would not have to totally re-configure the ZyXEL Device. You could simply restore your last configuration. 1.4 LEDs (Lights) The following graphic displays the labels of the LED. (Chapter 18 on page 219) P-2302HWUDL-P1 Series User’s Guide...

  • Page 37: Figure 6 Leds On The Side Panel

    None of the LEDs are on if the ZyXEL Device is not receiving power. Table 1 LED Descriptions COLOR STATUS POWER Green P-2302HWUDL-P1 Series User’s Guide Chapter 1 Introducing the ZyXEL Device DESCRIPTION The ZyXEL Device is receiving power and ready for use. Blinking The ZyXEL Device is self-testing.
  • Page 38 Blinking One of the DECT phones is in talk mode. The DECT base station is not in registration mode and there is not a registered SIP account associated with any of the DECT phones. P-2302HWUDL-P1 Series User’s Guide...

  • Page 39: Introducing The Web Configurator

    ZyXEL Device (refer to the Quick Start Guide). 2 Launch your web browser. 3 Type "192.168.1.1" (the ZyXEL Device’s default LAN IP address) as the URL. The Login screen appears. P-2302HWUDL-P1 Series User’s Guide Introducing the Web Configurator...

  • Page 40: Figure 8 Login Screen

    5 It is highly recommended to change your password. To change your password, type a new password, retype it to confirm it, and click Apply. Otherwise, click Ignore if you do not want to change your password right now. The Options screen should appear. P-2302HWUDL-P1 Series User’s Guide...

  • Page 41: Resetting The Zyxel Device

    You will lose all of your changes when you push the RESET button. To reset the ZyXEL Device, P-2302HWUDL-P1 Series User’s Guide Chapter 2 Introducing the Web Configurator Chapter 3 on page 47 for more information.

  • Page 42: Reset Button And Wlan

    As illustrated above, the main screen is divided into these parts: • A - title bar • B - navigation panel • C - main window • D - status bar sconnect and reconnect the ZyXEL P-2302HWUDL-P1 Series User’s Guide...

  • Page 43: Title Bar

    DHCP Setup Static DHCP Client List IP Alias Advanced P-2302HWUDL-P1 Series User’s Guide Chapter 2 Introducing the Web Configurator for more information. FUNCTION This screen contains administrative and system-related information. Use this screen to configure the wireless LAN settings and WLAN authentication/security settings.
  • Page 44 Use this screen to enable bandwidth management on an interface and set the maximum allowed bandwidth and scheduler for the interface. Use this screen to define bandwidth classes. Use this screen to view bandwidth class statistics. P-2302HWUDL-P1 Series User’s Guide...

  • Page 45: Main Window

    2.4.4 Status Bar Check the status bar when you click Apply or OK to verify that the configuration has been updated. P-2302HWUDL-P1 Series User’s Guide Chapter 2 Introducing the Web Configurator FUNCTION Use this screen to configure through which interface(s) and from which IP address(es) users can use HTTP to manage the ZyXEL Device.
  • Page 46 Chapter 2 Introducing the Web Configurator P-2302HWUDL-P1 Series User’s Guide...

  • Page 47: Wizard Setup

    Use this screen to open one of the wizards in the ZyXEL Device. To access this screen, click Go to Wizard setup in the Login Options screen, or click the Wizard icon in the upper right corner of the main screen. Figure 12 Main Wizard Screen P-2302HWUDL-P1 Series User’s Guide Wizard Setup...

  • Page 48: Connection Wizard

    Contact your ISP to find the correct port number. Chapter 6 on page 101 Connection Wizard to set up your Internet connection in the P-2302HWUDL-P1 Series User’s Guide Section 3.2 on page Section 3.3 on page Section 3.4 on page...

  • Page 49: Welcome

    Exit Click this to close this screen and return to the main screen. 3.2.2 System Information Usually, you should just click Next in this screen. Figure 14 Connection Wizard > System Information P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup...

  • Page 50: Wireless Network Setup

    The range of radio frequencies used by IEEE 802.11b/g wireless devices is called a Selection channel. Select a channel ID that is not already in use by a neighboring device. Section 22.1 on page 261 for more P-2302HWUDL-P1 Series User’s Guide...

  • Page 51: Figure 16 Manually Assign A Wpa/Wpa2 Key

    Click Back to display the previous screen. Next Click Next to proceed to the next screen. Exit Click Exit to close the wizard screen without saving. P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup Section 3.2.3.2 on page 51 Section 3.2.3.3 on page 52 for more...

  • Page 52: Figure 17 Manually Assign A Wep Key

    3.2.3.4 OTIST Screen This screen allows you to automatically configure security settings on your ZyXEL Device and the wireless clients that want to connect to it. See information on OTIST. Section 5.2.5 on page 88 for more P-2302HWUDL-P1 Series User’s Guide...

  • Page 53: Isp Parameters

    Click Exit to close the wizard screen without saving. 3.2.4 ISP Parameters This screen depends on the Connection Type you select. P-2302HWUDL-P1 Series User’s Guide device(s) within three minutes of each other. You can start OTIST in the wireless devices and the ZyXEL Device in any order.

  • Page 54: Figure 19 Connection Wizard > Isp Parameters (Ethernet)

    You must use the screens discussed in page 101 instead. Connection Wizard if you subscribe to a Roadrunner Chapter 6 on page 101 Connection Wizard if the PPPoE remote server cannot be P-2302HWUDL-P1 Series User’s Guide instead. Chapter 6 on...

  • Page 55: Your Ip Address

    Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. 3.2.5 Your IP Address Figure 21 Connection Wizard > IP Address P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup...

  • Page 56: Wan Ip Address Assignment

    This screen appears if you select Use fixed IP address provided by your ISP in the previous screen. Use this screen to set up your static IP address. The fields depend on the Connection Type you select in the 3.2.6.1 Ethernet Figure 22 Connection Wizard > IP Address (Ethernet) ISP Parameters screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 57: Table 14 Connection Wizard > Ip Address (Ethernet)

    Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. 3.2.6.2 PPPoE You cannot use the discovered automatically. P-2302HWUDL-P1 Series User’s Guide Connection Wizard if the PPPoE remote server cannot be Chapter 3 Wizard Setup...

  • Page 58: Figure 23 Connection Wizard > Ip Address (Pppoe)

    Third DNS Server < Back Click this to go to the previous screen. Next > Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 59: Mac Address

    Click this to go to the previous screen. Next > Click this to configure the ZyXEL Device and go to the next screen. Exit Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup...

  • Page 60: Apply The Connection Wizard Setting

    DESCRIPTION < Back Click this to go to the previous screen. Apply Click this to save your changes back to the ZyXEL Device. Exit Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 61: Finish

    VoIP service provider (the company that lets you make phone calls over the Internet) did not provide any information. See You must have a SIP account before you can use this wizard. P-2302HWUDL-P1 Series User’s Guide Chapter 9 on page 133 for more information.

  • Page 62: Sip Settings

    Enter the user name for registering this SIP account, exactly as it was given to you. You can use up to 95 printable ASCII Extended set characters. Check here to set Select this if you want to set up additional SIP accounts. up SIP settings 1234@VoIP- P-2302HWUDL-P1 Series User’s Guide...

  • Page 63: Registration Complete

    Click this to register your SIP account(s). Exit Click this to close this screen and return to the main screen. 3.3.2 Registration Complete This screen depends on whether or not the ZyXEL Device successfully registered your SIP account(s). P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup...

  • Page 64: Figure 29 Voip Setup Wizard > Registration Complete (Success)

    Setup page Finish Click this to close this screen and return to the main screen. If the ZyXEL Device cannot register your SIP account(s), see the Quick Start Guide for troubleshooting suggestions. Section 3.1 on page P-2302HWUDL-P1 Series User’s Guide...

  • Page 65: Bandwidth Management Wizard

    (or if you do not find a particular service), the service can still use bandwidth, but it does not have any guaranteed amount and it has the lowest priority. See Chapter 17 on page 205 P-2302HWUDL-P1 Series User’s Guide for more information. Chapter 3 Wizard Setup...

  • Page 66: Welcome

    Table 22 Bandwidth Management Wizard > Welcome LABEL DESCRIPTION < Back Click this to go to the previous screen. Next > Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 67: General Information

    < Back Click this to go to the previous screen. Next > Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup...

  • Page 68: Services Setup

    Click this to go to the previous screen. Next > Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. Management > Bandwidth MGMT > Class P-2302HWUDL-P1 Series User’s Guide Setup. If you select WWW,...

  • Page 69: Priority Setup

    Click this to go to the previous screen. Next > Click this to go to the next screen. Exit Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide Chapter 3 Wizard Setup Bandwidth Class Edit Screen.

  • Page 70: Finish

    Figure 35 Bandwidth Management Wizard > Finish The following table describes the labels in this screen. Table 26 Bandwidth Management Wizard > Finish LABEL DESCRIPTION Finish Click this to close this screen and return to the main screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 71: Status Screens

    Use this screen to look at the current status of the device, system resources, interfaces (LAN and WAN), and SIP accounts. You can also register and unregister SIP accounts. Click Status to open this screen. Figure 36 Status Screen P-2302HWUDL-P1 Series User’s Guide Status Screens...

  • Page 72: Table 27 Status Screen

    (Maintenance > Tools > Restart), or when you reset it (see 41). Current Date/ This field displays the current date and time in the ZyXEL Device. You can change Time this in Maintenance > System > Time Setting. Section 2.3 on page P-2302HWUDL-P1 Series User’s Guide...
  • Page 73 Click (Details ...) to open the Packet Statistics window. See VoIP Status Account This column displays each SIP account in the ZyXEL Device. P-2302HWUDL-P1 Series User’s Guide Section 24.2.5 on page Section 9.2 on page 138 for more information. Chapter 4 Status Screens...

  • Page 74: Any Ip Table Window

    Click Register to have the ZyXEL Device attempt to register the SIP account with the SIP server. The second field displays the reason the account is not registered. Section 4.1 on page P-2302HWUDL-P1 Series User’s Guide 71), and click (Details...

  • Page 75: Dhcp Table Window

    Click this to update this screen. 4.4 VoIP Statistics Window To access this screen, open the Status screen (see ...) next to VoIP Statistics. P-2302HWUDL-P1 Series User’s Guide Chapter 4 Status Screens Section 4.1 on page 71), and click (Details Section 4.1 on page...

  • Page 76: Figure 39 Voip Statistics Window

    This field displays each phone port in the ZyXEL Device. Hook This field indicates whether the phone is on the hook or off the hook. On - The phone is hanging up or already hung up. Off - The phone is dialing, calling, or connected. P-2302HWUDL-P1 Series User’s Guide...

  • Page 77: Bw Mgmt Monitor Window

    Click this to make the ZyXEL Device stop updating the screen. 4.5 BW MGMT Monitor Window To access this screen, open the Status screen (see ...) next to BW MGMT Monitor. P-2302HWUDL-P1 Series User’s Guide Chapter 4 Status Screens Section 4.1 on page 71), and click (Details...

  • Page 78: Figure 40 Bw Mgmt Monitor Window

    SIP traffic, FTP traffic, e-mail, or web traffic, depending on what traffic is allocated to sub-classes. You can change what traffic is allocated to sub-classes in Management > Bandwidth MGMT > Class Setup. or in Bandwidth MGMT. Each field is described in the following table. P-2302HWUDL-P1 Series User’s Guide Bandwidth...

  • Page 79: Packet Statistics Window

    Click this to make the ZyXEL Device stop updating the screen. 4.6 Packet Statistics Window To access this screen, open the Status screen (see ...) next to Packet Statistics. P-2302HWUDL-P1 Series User’s Guide Chapter 4 Status Screens Section 4.1 on page 71), and click (Details...

  • Page 80: Figure 41 Packet Statistics Window

    The ZyXEL Device starts up when you plug it in, when you restart it (Maintenance > Tools > Restart), or when you reset it (see 41). Poll Interval Enter how often you want the ZyXEL Device to update this screen, and click Set Interval. Section 2.3 on page P-2302HWUDL-P1 Series User’s Guide...
  • Page 81 Click this to make the ZyXEL Device update the screen based on the amount of time you specified in Poll Interval. Stop Click this to make the ZyXEL Device stop updating the screen. P-2302HWUDL-P1 Series User’s Guide Chapter 4 Status Screens...
  • Page 82 Chapter 4 Status Screens P-2302HWUDL-P1 Series User’s Guide...

  • Page 83: Network

    Network Wireless LAN (85) WAN (101) LAN (111) NAT (123)

  • Page 85: Wireless Lan

    The SSID is the name of the wireless network. It stands for Service Set IDentity. • If two wireless networks overlap, they should use a different channel. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. P-2302HWUDL-P1 Series User’s Guide Wireless LAN...

  • Page 86: Wireless Security Overview

    Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds of wireless devices might not have MAC addresses. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. ; for P-2302HWUDL-P1 Series User’s Guide...

  • Page 87: Encryption

    Many types of encryption use a key to protect the information in the wireless network. The longer the key, the stronger the encryption. Every device in the wireless network must have the same key. P-2302HWUDL-P1 Series User’s Guide Chapter 5 Wireless LAN RADIUS SERVER...

  • Page 88: One-Touch Intelligent Security Technology (Otist)

    IEEE 802.11b/g networks. Maximum Frame Burst sets the maximum time that the ZyXEL Device transmits IEEE 802.11g wireless traffic only. A small fragmentation threshold is recommended for busy networks, while a larger threshold provides faster performance if the network is not very busy. P-2302HWUDL-P1 Series User’s Guide for more details.

  • Page 89: No Security

    Select No Security to allow wireless stations to communicate with the access points without any data encryption. P-2302HWUDL-P1 Series User’s Guide connected to the wireless LAN and you change the ZyXEL Device’s SSID or WEP settings, you will lose your wireless connection when you press Apply to confirm.

  • Page 90: Wep Encryption Screen

    Choose No Security from the drop-down list box. 5.4.2 WEP Encryption Screen In order to configure and enable WEP encryption; click Network > Wireless LAN to display the General screen. Select Static WEP from the Security Mode list. P-2302HWUDL-P1 Series User’s Guide...

  • Page 91: Wpa(2)-Psk

    256-bit WEP key respectively. 5.4.3 WPA(2)-PSK In order to configure and enable WPA-PSK authentication; click Network > Wireless LAN to display the General screen. Select WPA-PSK or WPA2-PSK from the Security Mode list. P-2302HWUDL-P1 Series User’s Guide Chapter 5 Wireless LAN...

  • Page 92: Figure 46 Wireless: Wpa(2)-Psk

    Setting of the Group Key Update Timer is also supported in WPA- PSK mode. The ZyXEL Device default is 1800 seconds (30 minutes). RADIUS server, the reauthentication timer on the RADIUS server has priority. P-2302HWUDL-P1 Series User’s Guide...

  • Page 93: Wpa(2) Authentication Screen

    The wireless station needs to enter the username and password again before access to the wired network is allowed. The default time interval is 3600 seconds (or 1 hour). P-2302HWUDL-P1 Series User’s Guide RADIUS server, the reauthentication timer on the RADIUS server has priority.

  • Page 94: Otist Screen

    Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external accounting server and the ZyXEL Device. The key must be the same on the external accounting server and your ZyXEL Device. The key is not sent over the network. P-2302HWUDL-P1 Series User’s Guide...

  • Page 95: Figure 49 Example: Wireless Client Otist Screen

    4 Click Save. Figure 49 Example: Wireless Client OTIST Screen To start OTIST in the device, click Start in this screen. P-2302HWUDL-P1 Series User’s Guide DESCRIPTION Type a key (password) 8 ASCII characters long. Note: If you change the OTIST setup key in the ZyXEL Device, you must change it on the wireless devices too.

  • Page 96: Notes On Otist

    5.5.1 Notes on OTIST 1 If you enable OTIST in a wireless device, you see this screen each time you start the utility. Click Yes to search for an OTIST-enabled AP (in other words, the ZyXEL Device). P-2302HWUDL-P1 Series User’s Guide...

  • Page 97: Mac Filter

    OTIST on the AP and ALL wireless devices again. 5.6 MAC Filter To change your ZyXEL Device’s MAC filter settings, click Network > Wireless LAN > MAC Filter. The screen appears as shown. P-2302HWUDL-P1 Series User’s Guide Chapter 5 Wireless LAN...

  • Page 98: Figure 53 Mac Address Filter

    ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC Address address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to reload the previous configuration for this screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 99: Wireless Lan Advanced Setup

    ZyXEL Device. The transmission rate of your ZyXEL Device might be reduced. Apply Click Apply to save your changes back to the ZyXEL Device. Cancel Click Cancel to reload the previous configuration for this screen. P-2302HWUDL-P1 Series User’s Guide Chapter 5 Wireless LAN...
  • Page 100 Chapter 5 Wireless LAN P-2302HWUDL-P1 Series User’s Guide...

  • Page 101: Wan

    However, the Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of IP addresses specifically for private networks. Table 43 Private IP Address Ranges 10.0.0.0 10.255.255.255 172.16.0.0 172.31.255.255 192.168.0.0 192.168.255.255 P-2302HWUDL-P1 Series User’s Guide...

  • Page 102: Mac Address

    1 The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you sign up. If your ISP gives you DNS server addresses, enter them in the DNS Server fields in the SYSTEM General screen. 113. P-2302HWUDL-P1 Series User’s Guide...

  • Page 103: Wan Screens

    Some ISPs, such as Telstra, send UDP heartbeat packets to verify that the customer is still online. In this case, create a WAN to LAN firewall rule for those packets. Contact your ISP to find the correct port number. P-2302HWUDL-P1 Series User’s Guide Chapter 6 WAN...

  • Page 104: Wan Internet Connection Screen (Roadrunner)

    Device to use instead of the default MAC address. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 105: Wan Internet Connection Screen (Pppoe)

    Click this to set every field in this screen to its last-saved value. 6.2.3 WAN Internet Connection Screen (PPPoE) Use this screen to set up a PPPoE connection with the ISP. To access this screen, click Network > WAN > Internet Connection. P-2302HWUDL-P1 Series User’s Guide Chapter 6 WAN...

  • Page 106: Figure 57 Network > Wan > Internet Connection (Pppoe)

    Enter the number of seconds that the connection should be idle before the ZyXEL Device automatically disconnects. Enter zero if you do not want the ZyXEL Device to automatically disconnect. (This is the same as selecting Nailed-Up Connection.) P-2302HWUDL-P1 Series User’s Guide...

  • Page 107: Wan Advanced Screen

    6.2.4 WAN Advanced Screen Use this screen to set up DNS servers, RIP, and Windows Networking policies for the WAN. To access this screen, click Network > WAN > Advanced. P-2302HWUDL-P1 Series User’s Guide for more information. for more information.

  • Page 108: Figure 58 Network > Wan > Advanced

    RIP-1 - The ZyXEL Device uses RIPv1 to exchange routing information. RIP-2B - The ZyXEL Device broadcasts RIPv2 to exchange routing information. RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information. P-2302HWUDL-P1 Series User’s Guide...

  • Page 109: Wan Traffic Redirect Screen

    Use this screen to specify a backup gateway in case the default gateway (your ISP) is not available. To access this screen, click Network > WAN > Traffic Redirect. Figure 59 Network > WAN > Traffic Redirect P-2302HWUDL-P1 Series User’s Guide Chapter 6 WAN...

  • Page 110: Table 48 Network > Wan > Traffic Redirect

    3 - 50 are typical choices, but this number should be less than the Period. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 111: Lan

    The subnet mask specifies the network number portion of an IP address. Your ZyXEL Device will compute the subnet mask automatically based on the IP address that you entered. You don't need to change the subnet mask computed by the ZyXEL Device unless you are instructed to do otherwise. P-2302HWUDL-P1 Series User’s Guide...

  • Page 112: Dhcp Setup

    0.0.0.0, the ZyXEL Device tells the DHCP clients that it itself is the DNS server. When a computer sends a DNS query to the ZyXEL Device, the ZyXEL Device forwards the query to the real DNS server learned through IPCP and relays the response back to the computer. P-2302HWUDL-P1 Series User’s Guide...

  • Page 113: Rip Setup

    224.0.0.1 is used for query messages and is assigned to the permanent group of all IP hosts (including gateways). All hosts must join the 224.0.0.1 group in order to participate in IGMP. The address 224.0.0.2 is assigned to the multicast routers group. P-2302HWUDL-P1 Series User’s Guide Chapter 7 LAN...

  • Page 114: Any Ip

    Figure 60 Any IP Example The Any IP feature does not apply to a computer using either a dynamic IP address or a static IP address that is in the same subnet as the ZyXEL Device’s IP address. P-2302HWUDL-P1 Series User’s Guide...

  • Page 115: Lan Screens

    7.2.1 LAN IP Screen Use this screen to set up the ZyXEL Device’s IP address and subnet mask. To access this screen, click Network > LAN > IP. Figure 61 Network > LAN > IP P-2302HWUDL-P1 Series User’s Guide Chapter 7 LAN...

  • Page 116: Lan Dhcp Setup Screen

    LAN and provides the subnet mask and DNS server information. Enter the IP address from which the ZyXEL Device begins allocating IP addresses, if you have not specified an IP address for this computer in Network > LAN > Static DHCP. P-2302HWUDL-P1 Series User’s Guide...

  • Page 117: Lan Static Dhcp Screen

    Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer on the LAN. To access this screen, click Network > LAN > Static DHCP. Figure 63 Network > LAN > Static DHCP P-2302HWUDL-P1 Series User’s Guide Chapter 7 LAN...

  • Page 118: Lan Client List Screen

    Apply. The ZyXEL Device creates an entry in the LAN Static DHCP screen. Section 7.2.2 on page 116. Click this to save your changes and to apply them to the ZyXEL Device. Click this to update this screen with current DHCP client information. P-2302HWUDL-P1 Series User’s Guide...

  • Page 119: Lan Ip Alias Screen

    Select this to add the specified subnet to the LAN port. IP Address Enter the IP address of the ZyXEL Device on the subnet. IP Subnet Mask Enter the subnet mask of the subnet. P-2302HWUDL-P1 Series User’s Guide Chapter 7 LAN...

  • Page 120: Lan Advanced Screen

    RIP-2M - The ZyXEL Device multicasts RIPv2 to exchange routing information. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 121: Table 54 Network > Lan > Advanced

    This is the same setting you can set in Network > WAN > Advanced. Apply Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide Chapter 7 LAN...
  • Page 122 Chapter 7 LAN P-2302HWUDL-P1 Series User’s Guide...

  • Page 123: Nat

    WAN IP address. The NAT network appears as a single host on the Internet. Figure 67 Multiple Servers Behind NAT Example P-2302HWUDL-P1 Series User’s Guide to forward incoming service requests to the server(s) on for examples of services.

  • Page 124: Trigger Port Forwarding

    1 Trigger events only happen on data that is going coming from inside the ZyXEL Device and going to the outside. 2 If an application needs a continuous data stream, that port (range) will be tied up so that another computer on the LAN can’t trigger it. P-2302HWUDL-P1 Series User’s Guide...

  • Page 125: Sip Alg

    Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide Chapter 8 NAT Chapter 9 on page 133) if...

  • Page 126: Nat Port Forwarding Screen

    This field displays the beginning of the range of port numbers forwarded by this rule. This field displays the end of the range of port numbers forwarded by this rule. If it is the same as the Start Port, only one port number is forwarded. port(s) are forwarded. P-2302HWUDL-P1 Series User’s Guide...

  • Page 127: Nat Port Forwarding Edit Screen

    Use this screen to maintain port-triggering rules in the ZyXEL Device. To access this screen, click Network > NAT > Trigger Port. P-2302HWUDL-P1 Series User’s Guide enter the port number at the beginning of the range in the Start Port field enter the port number at the end of the range in the End Port field.

  • Page 128: Figure 72 Network > Nat > Trigger Port

    If you want to delete this rule, enter zero in the Start Port and End Port fields. Click this to save your changes and to apply them to the ZyXEL Device. Click this to discard your changes. P-2302HWUDL-P1 Series User’s Guide...

  • Page 129: Nat Alg Screen

    Select this to make sure H.323 (audio-visual programs, such as NetMeeting) works correctly with port-forwarding and port-triggering rules. Apply Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to discard your most recent changes. P-2302HWUDL-P1 Series User’s Guide Chapter 8 NAT...
  • Page 130 Chapter 8 NAT P-2302HWUDL-P1 Series User’s Guide...

  • Page 131: Voip

    VoIP SIP (133) Phone (147) Phone Book (163) PSTN Line (167) VoIP Trunking (169)

  • Page 133: Sip

    The SIP number is the part of the SIP URI that comes before the “@” symbol. A SIP number can use letters like in an e-mail address (johndoe@your-ITSP.com for example) or numbers like a telephone number (1122334455@VoIP-provider.com for example). P-2302HWUDL-P1 Series User’s Guide...

  • Page 134: Sip Call Progression

    A or B can act as a SIP user agent client to initiate a call. A and B can also both act as a SIP user agent to receive the call. 2. Ringing 3. OK 5.Dialogue (voice traffic) 7. OK P-2302HWUDL-P1 Series User’s Guide...

  • Page 135: Figure 74 Sip User Agent

    1 Client device A sends a call invitation for C to the SIP redirect server (B). 2 The SIP redirect server sends the invitation back to A with C’s IP address (or domain name). 3 Client device A then sends the call invitation to client device C. P-2302HWUDL-P1 Series User’s Guide Chapter 9 SIP...

  • Page 136: Rtp

    Use a SIP ALG (Application Layer Gateway), Use NAT, STUN, or outbound proxy to allow the ZyXEL Device to list its public IP address in the SIP messages. 9.1.7.1 SIP ALG Section 8.1.3 on page 125. P-2302HWUDL-P1 Series User’s Guide Chapter 8 on page...

  • Page 137: Figure 77 Stun

    • G.711 is a Pulse Code Modulation (PCM) waveform codec. PCM measures analog signal amplitudes at regular time intervals and converts them into bits. G.711 provides very good sound quality but requires 64kbps of bandwidth. P-2302HWUDL-P1 Series User’s Guide Chapter 9 SIP...

  • Page 138: Pstn Call Setup Signaling

    The ZyXEL Device supports DTMF at the time of writing. DESCRIPTION 127 seconds for all custom tones combined 20 seconds You can record up to 8 different custom tones but the total time must be 127 seconds or less. P-2302HWUDL-P1 Series User’s Guide...

  • Page 139: Listening To Custom Tones

    64 service levels. The following figure illustrates the DS field. Figure 78 DiffServ: Differentiated Service Field DSCP (6-bit) The ZyXEL Device does not support DiffServ at the time of writing. P-2302HWUDL-P1 Series User’s Guide Unused (2-bit) Chapter 9 SIP...

  • Page 140: Sip Screens

    (the company that lets you make phone calls over the Internet) should provide this. You can also enable and disable each SIP account. To access this screen, click VoIP > SIP > SIP Settings. Figure 79 VoIP > SIP > SIP Settings P-2302HWUDL-P1 Series User’s Guide...

  • Page 141: Advanced Sip Setup Screen

    Setup screen appears. 9.3.2 Advanced SIP Setup Screen Use this screen to maintain advanced settings for each SIP account. To access this screen, click Advanced Setup in VoIP > SIP > SIP Settings. P-2302HWUDL-P1 Series User’s Guide Chapter 9 SIP...

  • Page 142: Figure 80 Voip > Sip > Sip Settings > Advanced

    Chapter 9 SIP Figure 80 VoIP > SIP > SIP Settings > Advanced P-2302HWUDL-P1 Series User’s Guide...

  • Page 143: Table 63 Voip > Sip > Sip Settings > Advanced

    Type you only want the ZyXEL Device to accept the first or second choice. P-2302HWUDL-P1 Series User’s Guide enter the port number at the beginning of the range in the Start Port field enter the port number at the end of the range in the End Port field.
  • Page 144 Select this if the SIP server is an outbound proxy server. You must enable Outbound Proxy to use this. Enter how often (in seconds) the ZyXEL Device should send SIP notify messages to the SIP server. P-2302HWUDL-P1 Series User’s Guide...

  • Page 145: Sip Qos Screen

    Use this screen to maintain ToS and VLAN settings for the ZyXEL Device. To access this screen, click VoIP > SIP > QoS. Figure 81 VoIP > SIP > QoS P-2302HWUDL-P1 Series User’s Guide Section 9.2 on page 138 for more information.

  • Page 146: Table 64 Voip > Sip > Qos

    VLAN tags. Otherwise, clear this field. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 147: Phone

    VoIP service provider. The ZyXEL Device supports the following services: • Call Hold • Call Waiting • Making a Second Call • Call Transfer • Call Forwarding • Three-Way Conference • Internal Calls P-2302HWUDL-P1 Series User’s Guide Phone...

  • Page 148: Europe Type Supplementary Phone Services

    2. Put a current call on hold to answer an incoming call. 3. Separate the current three-way conference call into two individual calls (one is on-line, the other is on hold). Create three-way conference connection. Transfer the call to another phone. P-2302HWUDL-P1 Series User’s Guide...

  • Page 149: Usa Type Supplementary Services

    COMMAND SUB-COMMAND Flash Flash *98# P-2302HWUDL-P1 Series User’s Guide DESCRIPTION Put a current call on hold to place a second call. After the second call is successful, press the flash key again to have a three-way conference call. Put a current call on hold to answer an incoming call.

  • Page 150: Phone Screens

    “2”. 10.2 Phone Screens 10.2.1 Analog Phone Screen Use this screen to control which SIP accounts and PSTN line each phone uses. To access this screen, click VoIP > Phone > Analog Phone. P-2302HWUDL-P1 Series User’s Guide...

  • Page 151: Advanced Analog Phone Setup Screen

    Phone Setup screen appears. 10.2.2 Advanced Analog Phone Setup Screen Use this screen to edit advanced settings for each phone port. To access this screen, click Advanced Setup in VoIP > Phone > Analog Phone. P-2302HWUDL-P1 Series User’s Guide Chapter 10 Phone...

  • Page 152: Figure 83 Voip > Phone > Analog Phone > Advanced

    Select this if the ZyXEL Device should stop transmitting when you are not speaking. This reduces the bandwidth the ZyXEL Device uses. Click this to return to the Analog Phone screen without saving your changes. P-2302HWUDL-P1 Series User’s Guide...

  • Page 153: Dect Base Station Overview

    The ZyXEL Device stays in registration mode for 30 seconds. If you press the DECT base station button for 12 seconds or more, the DECT base station resets and all previously registered DECT phones must be re- registered. P-2302HWUDL-P1 Series User’s Guide Chapter 10 Phone...

  • Page 154: Figure 85 Dect Base Station Button - Top Of The Zyxel Device

    4 Repeat steps 1 - 3 to register additional phones. See number of DECT phones your ZyXEL Device supports. Appendix A on page 295 for the range of your ZyXEL Appendix A on page 295 P-2302HWUDL-P1 Series User’s Guide for the...

  • Page 155: Using Your Dect Phone

    ZyXEL Device DECT base station. External A call from the DECT phone to or from a VoIP or a PSTN caller. P-2302HWUDL-P1 Series User’s Guide Figure 85 on page LIMITS Two calls. Two calls. Chapter 10 Phone...

  • Page 156: Dect Phone Screen

    10.3.3 DECT Phone Screen Use this screen to configure your DECT base station settings. To access this screen, click VoIP > Phone > DECT Phone. LIMITS One call. Section 10.1.3 on page 147. On most DECT phone P-2302HWUDL-P1 Series User’s Guide...

  • Page 157: Figure 88 Voip > Phone > Dect Phone

    Enter the new PIN code. The PIN code is 1 to 4 digits long and is limited to Code numbers 0 to 9. Retype to Retype the new PIN code. Confirm P-2302HWUDL-P1 Series User’s Guide with the ZyXEL Device will have to re-register when they are turned off and turned on again. Chapter 10 Phone...

  • Page 158: Common Phone Settings Screen

    ZyXEL Device makes the call immediately, instead of waiting. You can still wait, if you want. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 159: Phone Ext. Table Setup Screen

    The phone that picks up first gets the line, and the other phones stop ringing. Click VoIP > Phone > Ext. Table to access this screen. P-2302HWUDL-P1 Series User’s Guide DEFAULT EXT. NUMBER Chapter 10 Phone...

  • Page 160: Figure 91 Voip > Phone > Ext. Table

    Click the edit icon to edit advanced settings Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 161: Advanced Phone Ext. Table Setup Screen

    Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide VoIP > Phone > Ext. Table screen. Chapter 10 Phone...
  • Page 162 Chapter 10 Phone P-2302HWUDL-P1 Series User’s Guide...

  • Page 163: Phone Book

    Use this screen to maintain rules for handling incoming calls. You can block, redirect, or accept them. To access this screen, click VoIP > Phone Book > Incoming Call Policy. Figure 93 VoIP > Phone Book > Incoming Call Policy P-2302HWUDL-P1 Series User’s Guide Phone Book...

  • Page 164: Table 76 Voip > Phone Book > Incoming Call Policy

    Forward to Number section. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 165: Speed Dial Screen

    Select Non-Proxy (Use IP or URL) if you want to use a different SIP server or if you want to make a peer-to-peer call. In this case, enter the IP address or domain name of the SIP server or the other party in the field below. P-2302HWUDL-P1 Series User’s Guide Chapter 11 Phone Book...
  • Page 166 Dial section, where you can change it. Click the Remove icon to erase this speed-dial entry. Click this to erase all the speed-dial entries. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 167: Pstn Line

    12.2 PSTN Line Screen Use this screen to set up the PSTN line you use to make regular phone calls. To access this screen, click VoIP > PSTN Line > General. P-2302HWUDL-P1 Series User’s Guide PSTN Line...

  • Page 168: Figure 94 Voip > Pstn Line > General

    The number (1 - 9) is not a speed-dial number. It is just a sequential value that is not associated with any phone number. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 169: Voip Trunking

    The following sections describe the details of VoIP trunking. 13.2 VoIP Trunking and Security Your ZyXEL Device provides two types of authentication to prevent unauthorized callers from using it for VoIP trunking. P-2302HWUDL-P1 Series User’s Guide Chapter 13 VoIP Trunking VoIP Trunking...

  • Page 170: Auto Attendant And Authentication

    The bolded entries must match in order for authentication between two peer devices to occur. Table 79 Matching Incoming and Outgoing Authentication ACCOUNT DETAILS Outgoing Authentication Username LOCAL PEER DEVICE REMOTE PEER DEVICE localDeviceA localDeviceB P-2302HWUDL-P1 Series User’s Guide...

  • Page 171: Call Rules

    PSTN phone C. A can be an analog phone connected to the ZyXEL Device or any other phone capable of making calls over the IP network. Figure 96 VoIP Phone To PSTN Phone P-2302HWUDL-P1 Series User’s Guide LOCAL PEER DEVICE passwordA...

  • Page 172: Pstn Phone To Voip Phone

    VoIP Trunking requires the following additional configuration in the VoIP > SIP > SIP Settings > Advanced Setup screen: Voice Compression field needs to be set to G.729 and DTMF Mode field needs to be set to SIP INFO. VoIP > Trunking > General. P-2302HWUDL-P1 Series User’s Guide...

  • Page 173: Trunking Peer Call Screen

    Use this screen to set up outgoing authentication accounts for forwarding calls through peer devices and incoming authentication accounts for forwarding calls from peer devices. To access this screen, click P-2302HWUDL-P1 Series User’s Guide VoIP > Trunking > Peer Call.

  • Page 174: Figure 100 Voip > Trunking > Peer Call

    Enter the username needed to authenticate at the remote peer device. The remote peer device must have the same username in an incoming authentication entry in order to authenticate your connection. Enter up to 32 alphanumeric characters. P-2302HWUDL-P1 Series User’s Guide...

  • Page 175: Trunking Call Rule Screen

    13.7 Trunking Call Rule Screen Use this screen to set up rules that determine which peer VoIP device your call will be forwarded to. To access this screen, click P-2302HWUDL-P1 Series User’s Guide Chapter 13 VoIP Trunking (continued) VoIP > Trunking > Call...

  • Page 176: Figure 101 Voip > Trunking > Call Rule

    This account is used to direct your call to the correct remote peer device and to authenticate you. Select None to disable this forwarding rule. Click this to apply your settings to the ZyXEL Device. Click this to reset the fields. P-2302HWUDL-P1 Series User’s Guide...

  • Page 177: Voip Trunking Example: Voip To Pstn

    This must be a non-proxy IP address. The numbers are the phone numbers of the sales team members. This can be configured in the VoIP > Phone Book > Speed Dial screen. P-2302HWUDL-P1 Series User’s Guide Chapter 13 VoIP Trunking...

  • Page 178: Configuration Details: Incoming

    This consists of a username and password. This account must match the username and password of the outgoing authentication account of the headquarters’ ZyXEL Device. This can be configured in the VoIP > Trunking > Peer Call screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 179: Call Progression

    13.9 VoIP Trunking Example: PSTN to PSTN via VoIP This example shows how to configure a PSTN to PSTN call with a VoIP link. It also shows how call rules can be used to automate VoIP trunking. P-2302HWUDL-P1 Series User’s Guide Chapter 13 VoIP Trunking BRANCH OFFICE The remote peer device forwards the call to Sales1.

  • Page 180: Background Information

    ZyXEL Device) for the PSTN caller to initiate VoIP trunking by dialing another number. It waits 3 seconds between dialing digits before it determines that the entire phone number is entered. These settings can be configured in the VoIP > Trunking > General screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 181: Figure 107 Pstn To Pstn Example: General Configuration

    (“5555”) of “Sales1” telephone number. The account name is the name of the outgoing authentication account created in the Speed Dial screen (“CityB”). This setting can be configured in the VoIP > Trunking > Call Rule screen. P-2302HWUDL-P1 Series User’s Guide Chapter 13 VoIP Trunking...

  • Page 182: Configuration Details: Incoming

    This consists of a username and password. This account must match the username and password of the outgoing authentication account of the headquarters’ ZyXEL Device. This can be configured in the VoIP > Trunking > Peer Call screen. Figure 110 PSTN to PSTN Example - Incoming Authentication P-2302HWUDL-P1 Series User’s Guide...

  • Page 183: Call Progression

    The remote peer device confirms that the username and password match an account in its incoming authentication list. Sales1 picks up and the call commences. P-2302HWUDL-P1 Series User’s Guide Chapter 13 VoIP Trunking BRANCH OFFICE The remote peer device forwards the call to Sales1.
  • Page 184 Chapter 13 VoIP Trunking P-2302HWUDL-P1 Series User’s Guide...

  • Page 185: Security

    Security Firewall (187) Content Filter (195)

  • Page 187: Firewall

    The ZyXEL Device is installed between the LAN and a broadband modem connecting to the Internet. This allows it to act as a secure gateway for all data passing between the Internet and the LAN. P-2302HWUDL-P1 Series User’s Guide Firewall...

  • Page 188: Guidelines For Enhancing Security With Your Firewall

    Internet. You can block certain LAN-to-WAN traffic in the Services screen (click the Services tab). All services displayed in the Blocked Services list box are LAN-to-WAN firewall rules that block those services originating from the LAN. P-2302HWUDL-P1 Series User’s Guide...

  • Page 189: Wan-To-Lan Rules

    Device’s LAN IP address), the “triangle route” (also called asymmetrical route) problem may occur. The steps below describe the “triangle route” problem. 1 A computer on the LAN initiates a connection by sending out a SYN packet to a receiving server on the WAN. P-2302HWUDL-P1 Series User’s Guide Chapter 14 Firewall...

  • Page 190: Solving The "Triangle Route" Problem

    2 The ZyXEL Device reroutes the packet to Gateway A, which is in Subnet 2. 3 The reply from the WAN goes to the ZyXEL Device. 4 The ZyXEL Device then sends it to the computer on the LAN in Subnet 1. P-2302HWUDL-P1 Series User’s Guide...

  • Page 191: Firewall Screens

    The ZyXEL Device automatically allocates memory for the maximum number of rules, regardless of whether or not there is a rule to enforce. This is the same number you enter in Network > NAT > General. P-2302HWUDL-P1 Series User’s Guide Chapter 14 Firewall...

  • Page 192: Firewall Services Screen

    Click this to set every field in this screen to its last-saved value. DESCRIPTION Select this to activate service blocking. The Schedule to Block section controls what days and what times service blocking is actually effective, however. P-2302HWUDL-P1 Series User’s Guide...
  • Page 193 Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide Chapter 14 Firewall for some examples of services.
  • Page 194 Chapter 14 Firewall P-2302HWUDL-P1 Series User’s Guide...

  • Page 195: Content Filter

    Use this screen to set up a trusted IP address, which web features are restricted, and which keywords are blocked when content filtering is effective. To access this screen, click Security > Content Filter > Filter. P-2302HWUDL-P1 Series User’s Guide Content Filter...

  • Page 196: Figure 117 Security > Content Filter > Filter

    Type a keyword you want to block in this field. You can use up to 64 printable ASCII characters. There is no wildcard character, however. Click this to add the specified Keyword to the Keyword List. You can enter up to 64 keywords. http:// P-2302HWUDL-P1 Series User’s Guide...

  • Page 197: Content Filter Schedule Screen

    24-hour format; for example, 3:00pm should be entered as 15:00. Apply Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide Chapter 15 Content Filter...
  • Page 198 Chapter 15 Content Filter P-2302HWUDL-P1 Series User’s Guide...

  • Page 199: Management

    Management Static Route (201) Bandwidth MGMT (205) Remote MGMT (217) UPnP (225) Sharing a USB Printer (237) File Sharing (251)

  • Page 201: Static Route

    16.2 Static Route Screens 16.2.1 IP Static Route Screen Use this screen to look at static routes in the ZyXEL Device. To access this screen, click Management > Static Route > IP Static Route. P-2302HWUDL-P1 Series User’s Guide Static Route...

  • Page 202: Ip Static Route Edit Screen

    Use this field to edit or erase the static route. Click the Edit icon to open the IP Static Route Edit screen for this static route. Click the Remove icon to erase this static route. P-2302HWUDL-P1 Series User’s Guide...

  • Page 203: Figure 121 Management > Static Route > Ip Static Route > Edit

    15, the routers assume the link is down. Apply Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to return to the previous screen without saving your changes. P-2302HWUDL-P1 Series User’s Guide Chapter 16 Static Route for more information.
  • Page 204 Chapter 16 Static Route P-2302HWUDL-P1 Series User’s Guide...

  • Page 205: Bandwidth Mgmt

    View your configured bandwidth classes and sub-classes in the Screen. The total of the configured bandwidth budgets for sub-classes cannot exceed the configured bandwidth budget speed of the parent class. P-2302HWUDL-P1 Series User’s Guide Bandwidth MGMT Bandwidth Class Setup Screen Bandwidth Class Setup...

  • Page 206: Proportional Bandwidth Allocation

    The scheduler divides up an interface’s bandwidth among the bandwidth classes. The ZyXEL Device has two types of schedulers: fairness-based and priority-based. FROM SUBNET A FROM SUBNET B 64 Kbps 64 Kbps 64 Kbps 64 Kbps 64 Kbps 64 Kbps 64 Kbps 64 Kbps 64 Kbps 64 Kbps P-2302HWUDL-P1 Series User’s Guide...

  • Page 207: Maximize Bandwidth Usage

    Table 93 Maximize Bandwidth Usage Example BANDWIDTH CLASSES AND ALLOTMENTS Root Class: 10240 kbps P-2302HWUDL-P1 Series User’s Guide Administration: 2048 kbps Sales: 2048 kbps Marketing: 2048 kbps Research: 2048 kbps Chapter 17 Bandwidth MGMT Section 17.1.8 on page...

  • Page 208: Table 94 Priority-Based Allotment Of Unused & Unbudgeted Bandwidth Example

    3072 kbps Administration: Priority 4, 1024 kbps Sales: Priority 6, 3584 kbps Marketing: Priority 6, 3584 kbps Research: Priority 5, 2048 kbps Administration: 1024 kbps Sales: 3072 kbps Marketing: 3072 kbps Research: 3072 kbps P-2302HWUDL-P1 Series User’s Guide...

  • Page 209: Bandwidth Borrowing

    4 If the bandwidth requirements of all of the traffic classes are met and there is still some unbudgeted bandwidth, the ZyXEL Device assigns it to traffic that does not match any of the classes. P-2302HWUDL-P1 Series User’s Guide 209). Administration: Borrowing Enabled...

  • Page 210: Over Allotment Of Bandwidth

    To access this screen, click Management > Bandwidth MGMT > Summary. VoIP traffic (Service = SIP): 500 Kbps NetMeeting traffic (Service = H.323): 500 kbps FTP (Service = FTP): 500 Kbps P-2302HWUDL-P1 Series User’s Guide PRIORITIES High High Medium...

  • Page 211: Figure 123 Management > Bandwidth Mgmt > Summary

    Clear this if you want to reserve bandwidth for traffic that does not match a bandwidth class or if you want to limit the speed of this interface. P-2302HWUDL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT Bandwidth Management...
  • Page 212 Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. Wizard. Wizard. P-2302HWUDL-P1 Series User’s Guide...

  • Page 213: Bandwidth Class Setup Screen

    Bandwidth Class Edit screen appears. Delete Click this to delete the selected class and all its sub-classes. You cannot delete the root class. P-2302HWUDL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT Section 17.2.1 on page 210). There is a default class...

  • Page 214: Bandwidth Class Edit Screen

    Spaces are allowed. 20000 kbps for each class. Enter the priority of this class. The higher the number, the higher the priority. Legal values are 0 - 7. The default setting is 3. P-2302HWUDL-P1 Series User’s Guide...

  • Page 215: Bandwidth Monitor Screen

    17.2.4 Bandwidth Monitor Screen Use this screen to look at the device’s bandwidth usage and allocation. To access this screen, click Management > Bandwidth MGMT > Monitor. P-2302HWUDL-P1 Series User’s Guide Chapter 17 Bandwidth MGMT Section 17.1.7.1 on page 207) or...

  • Page 216: Figure 126 Management > Bandwidth Mgmt > Monitor

    This field displays the amount of bandwidth allocated to each bandwidth class. This field displays the amount of bandwidth that each bandwidth class is using. Click Refresh to update the screen. Screen, the ZyXEL Device uses the P-2302HWUDL-P1 Series User’s Guide...

  • Page 217: Remote Mgmt

    You may only have one remote management session running at one time. 4 There is a firewall rule that blocks it. 18.1.2 Remote Management and NAT When NAT is enabled: P-2302HWUDL-P1 Series User’s Guide Remote MGMT • ALL (LAN and WAN) •...

  • Page 218: System Timeout

    Select Selected to only allow the computer with the IP address that you specify to access the ZyXEL Device using this service. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 219: Ftp Screen

    Enter the port number this service can use to access the ZyXEL Device. The computer must use the same port number. Server Access Select the interface(s) through which a computer may access the ZyXEL Device using this service. P-2302HWUDL-P1 Series User’s Guide Chapter 18 Remote MGMT...

  • Page 220: Snmp

    Select Selected to only allow the computer with the IP address that you specify to access the ZyXEL Device using this service. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 221: Supported Mibs

    SNMP. The screen appears as shown. Use this screen to control FTP access to your ZyXEL Device. To access this screen, click Management > Remote MGMT > SNMP. P-2302HWUDL-P1 Series User’s Guide Chapter 18 Remote MGMT DESCRIPTION A trap is sent after booting (power on).

  • Page 222: Dns Screen

    Choose Selected to just allow the computer with the IP address that you specify to access the ZyXEL Device using this service. Click Apply to save your customized settings and exit this screen. Click Cancel to begin configuring this screen afresh. P-2302HWUDL-P1 Series User’s Guide...

  • Page 223: Security Screen

    Use this screen to control how your ZyXEL Device responds to other types of requests. To access this screen, click Management > Remote MGMT > Security. Figure 133 Management > Remote MGMT > Security P-2302HWUDL-P1 Series User’s Guide Chapter 18 Remote MGMT...

  • Page 224: Table 108 Management > Remote Mgmt > Security

    UDP ports and with a TCP Reset packet for a port probe on unused TCP ports. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 225: Upnp

    When a UPnP device joins a network, it announces its presence with a multicast message. For security reasons, the ZyXEL Device allows multicast messages on the LAN only. P-2302HWUDL-P1 Series User’s Guide for further information about NAT. UPnP...

  • Page 226: Upnp And Zyxel

    2 Click on the Windows Setup tab and select Communication in the Components selection box. Click Details. Figure 134 Add/Remove Programs: Windows Setup: Communication 3 In the Communications window, select the Universal Plug and Play check box in the Components selection box. P-2302HWUDL-P1 Series User’s Guide...

  • Page 227: Figure 135 Add/Remove Programs: Windows Setup: Communication: Components

    3 In the Network Connections window, click Advanced in the main menu and select Optional Networking Components …. Figure 136 Network Connections 4 The Windows Optional Networking Components Wizard window displays. Select Networking Service in the Components selection box and click Details. P-2302HWUDL-P1 Series User’s Guide Chapter 19 UPnP...

  • Page 228: Figure 137 Windows Optional Networking Components Wizard

    Figure 137 Windows Optional Networking Components Wizard 5 In the Networking Services window, select the Universal Plug and Play check box. Figure 138 Networking Services 6 Click OK to go back to the Windows Optional Networking Component Wizard window and click Next. P-2302HWUDL-P1 Series User’s Guide...

  • Page 229: Using Upnp In Windows Xp Example

    1 Click Start and Control Panel. Double-click Network Connections. An icon displays under Internet Gateway. 2 Right-click the icon and select Properties. Figure 139 Network Connections 3 In the Internet Connection Properties window, click Settings to see the port mappings there were automatically created. P-2302HWUDL-P1 Series User’s Guide Chapter 19 UPnP...

  • Page 230: Figure 140 Internet Connection Properties

    Chapter 19 UPnP Figure 140 Internet Connection Properties 4 You may edit or delete the port mappings or click Add to manually add port mappings. P-2302HWUDL-P1 Series User’s Guide...

  • Page 231: Figure 141 Internet Connection Properties: Advanced Settings

    5 When the UPnP-enabled device is disconnected from your computer, all port mappings will be deleted automatically. 6 Select Show icon in notification area when connected option and click OK. An icon displays in the system tray. P-2302HWUDL-P1 Series User’s Guide Chapter 19 UPnP...

  • Page 232: Figure 143 System Tray Icon

    IP address of the ZyXEL Device first. This comes helpful if you do not know the IP address of the ZyXEL Device. Follow the steps below to access the web configurator. 1 Click Start and then Control Panel. 2 Double-click Network Connections. 3 Select My Network Places under Other Places. P-2302HWUDL-P1 Series User’s Guide...

  • Page 233: Figure 145 Network Connections

    Figure 145 Network Connections 4 An icon with the description for each UPnP-enabled device displays under Local Network. 5 Right-click on the icon for your ZyXEL Device and select Invoke. The web configurator login screen displays. P-2302HWUDL-P1 Series User’s Guide Chapter 19 UPnP...

  • Page 234: Figure 146 Network Connections: My Network Places

    Figure 146 Network Connections: My Network Places 6 Right-click on the icon for your ZyXEL Device and select Properties. A properties window displays with basic information about the ZyXEL Device. Figure 147 Network Connections: My Network Places: Properties: Example P-2302HWUDL-P1 Series User’s Guide...

  • Page 235: General

    Clear this if you want the firewall to check UPnP application packets (for example, Firewall MSN packets). Apply Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide Chapter 19 UPnP...
  • Page 236 Chapter 19 UPnP P-2302HWUDL-P1 Series User’s Guide...

  • Page 237: Sharing A Usb Printer

    20.2 Requirements To configure the print server you need the following: • Microsoft Windows 95, Windows 98 SE (Second Edition), Windows Me, Windows NT 4.0, Windows 2000, Windows XP or Macintosh OS X. P-2302HWUDL-P1 Series User’s Guide Section 20.5 on page...

  • Page 238: Configure A Tcp/Ip Printer Port

    The Printers folder opens up. First you need to open up the properties windows for the printer you want to configure a TCP/IP port. 2 Locate your printer. 3 Right click on your printer and select properties. P-2302HWUDL-P1 Series User’s Guide...

  • Page 239: Figure 151 Open Printer Properties

    4 Select the Ports tab and click Add Port... Figure 152 Printer Properties Window 5 A Printer Ports window appears. Select Standard TCP/IP Port and click New Port... Figure 153 Add a Port Window P-2302HWUDL-P1 Series User’s Guide Chapter 20 Sharing a USB Printer...

  • Page 240: Figure 154 Add A Port Wizard

    The computer from which you are configuring the TCP/IP printer port must be on the same LAN in order to use the printer sharing function. Figure 155 Enter IP Address of the ZyXEL Device 8 Select Custom under Device Type and click Settings. P-2302HWUDL-P1 Series User’s Guide...

  • Page 241: Figure 156 Custom Port Settings

    Queue Name. Figure 157 Custom Port Settings 12 Continue through the wizard, apply your settings and close the wizard window. P-2302HWUDL-P1 Series User’s Guide Chapter 20 Sharing a USB Printer...

  • Page 242: Print Server Screen

    This name is displayed on a computer on the print server network when a print job is executed. This displays the model name of the printer currently connected to the ZyXEL Device print server. P-2302HWUDL-P1 Series User’s Guide...

  • Page 243: Adding A New Printer Example

    1 Open your Printers folder and double click Add Printer. Figure 160 Printers Folder 2 The Add Printer Wizard screen displays. Click Next. P-2302HWUDL-P1 Series User’s Guide DESCRIPTION This field displays the print server status on the ZyXEL Device. Ready: The print server has established a TCP/IP connection with a printer, is online and ready to print.

  • Page 244: Figure 161 Add Printer Wizard: Welcome

    Figure 161 Add Printer Wizard: Welcome 3 Select Local printer and click Next. Figure 162 Add Printer Wizard: Local or Network Printer 4 Select an LPT (Line Printing Terminal) port (a parallel port) as the computer interface for the USB printer. P-2302HWUDL-P1 Series User’s Guide...

  • Page 245: Figure 163 Add Printer Wizard: Select The Printer Port

    Otherwise, select Replace existing driver to replace it with the new driver you selected in the previous screen and click Next. P-2302HWUDL-P1 Series User’s Guide Chapter 20 Sharing a USB Printer...

  • Page 246: Figure 165 Add Printer Wizard: Use Existing Driver

    11 The ZyXEL Device is a print server itself and you do not need to have your computer act as a print server by sharing the printer with other users in the same network; just select Do not share this printer and click Next to proceed to the following screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 247: Figure 167 Add Printer Wizard: Printer Sharing

    Otherwise select No and then click Next to continue. Figure 168 Add Printer Wizard: Print Test Page 13 The following screen shows your current printer settings. Select Finish to complete adding a new printer. P-2302HWUDL-P1 Series User’s Guide Chapter 20 Sharing a USB Printer...

  • Page 248: Macintosh Os X Adding Printer Example

    2 On your desktop, double-click the Macintosh HD icon to open the Macintosh HD window. Figure 170 Macintosh HD 3 Double-click the Applications folder. Macintosh HD folder Figure 171 4 Double-click the Utilities folder. located in the Macintosh Dock (a place holding a series to continue. If the P-2302HWUDL-P1 Series User’s Guide...

  • Page 249: Figure 172 Applications Folder

    10 Type LP1 (a parallel port) in the Queue Name field. 11 Select your Printer Model from the drop-down list box. If the printer's model is not listed, select Generic. P-2302HWUDL-P1 Series User’s Guide Chapter 20 Sharing a USB Printer...

  • Page 250: Figure 175 Printer Configuration

    13 The Name LP1 on 192.168.1.1 displays in the Printer List field. The default printer Name displays in bold type. Figure 177 Print Server 14 Your Macintosh print server driver setup is complete. You can now use the ZyXEL Device’s print server to print from a Macintosh computer. P-2302HWUDL-P1 Series User’s Guide...

  • Page 251: File Sharing

    File Allocation Table (FAT) and FAT32 file systems are the only file systems compatible with the file sharing feature. Figure 178 File Sharing Overview Do the following to set up file sharing via your ZyXEL Device: P-2302HWUDL-P1 Series User’s Guide File Sharing...

  • Page 252: Sharing Files Via The Zyxel Device

    This is the value you have to enter in the Workgroup Name field in the File Sharing screen. The ZyXEL Device fails to detect my USB device. Section 21.3 on page 253 for more information. P-2302HWUDL-P1 Series User’s Guide...

  • Page 253: User Accounts

    21.4 File Sharing - General Screen Use this screen to set up file sharing via the ZyXEL Device. To access this screen, click Management > File Sharing. P-2302HWUDL-P1 Series User’s Guide Chapter 21 File Sharing...

  • Page 254: Figure 181 Management > File Sharing

    Note: If you deactivate the account, you deactivate the file sharing feature. Enter the user name of the account. The user name can be 31 alpha-numeric characters long. Enter the password for this account. The password can be 99 alpha-numeric characters long. P-2302HWUDL-P1 Series User’s Guide...

  • Page 255: Examples Of Accessing Files Via The Zyxel Device

    OK. See Once you login to the file “share” via your ZyXEL Device, you do not have to relogin until you restart your computer. P-2302HWUDL-P1 Series User’s Guide Figure 182 on page 256. Chapter 21 File Sharing...

  • Page 256: Using The Run Utility To Share Files

    In your web browser’s address or URL bar type “ftp:\\” followed by the IP address of the ZyXEL Device (the default LAN IP address of the ZyXEL Device is 192.168.1.1) and click Go or press [ENTER]. P-2302HWUDL-P1 Series User’s Guide...

  • Page 257: Using The Workgroup Name To Access Files

    Before using this method to access files you need to make sure that you have correctly configured the workgroup name in the File Sharing > General screen. See page 252 for more information. P-2302HWUDL-P1 Series User’s Guide Chapter 21 File Sharing Section 21.2.1 on...

  • Page 258: Figure 187 Browse To A File Share Via Workgroup Name

    “share” by locating the workgroup in your file system. It is located under My Network Places. In our example the workgroup name is the default “Workgroup”. Figure 187 Browse to a File Share via Workgroup Name P-2302HWUDL-P1 Series User’s Guide...

  • Page 259: Maintanence And Troubleshooting

    Maintanence and Troubleshooting System (261) Log (269) Tools (281) Troubleshooting (287)

  • Page 261: System

    22.1.3 General System Screen Use this screen to change the ZyXEL Device’s mode, set up the ZyXEL Device’s system name, domain name, idle timeout, and administrator password. To access this screen, click Maintenance > System > General. P-2302HWUDL-P1 Series User’s Guide System...

  • Page 262: Dynamic Dns Overview

    As you type the password, the screen displays an asterisk (*) for each character you type. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 263: Dns Server Address Assignment

    If you have a private WAN IP address, then you cannot use Dynamic DNS. 22.2.3 Dynamic DNS Screen To access this screen, click Maintenance > System > Dynamic DNS. P-2302HWUDL-P1 Series User’s Guide Chapter 22 System...

  • Page 264: Figure 189 Maintenance > System > Dynamic Dns

    Select this if your Dynamic DNS service provider redirects traffic to a URL that you can specify while you are off line. Check with your Dynamic DNS service provider. Select this if you want the ZyXEL Device to update the domain name with the WAN port's IP address. P-2302HWUDL-P1 Series User’s Guide...

  • Page 265: Time Setting Overview

    Table 114 Pre-defined NTP Time Servers ntp1.cs.wisc.edu ntp1.gbg.netnod.se ntp2.cs.wisc.edu tock.usno.navy.mil ntp3.cs.wisc.edu ntp.cs.strath.ac.uk ntp1.sp.se time1.stupi.se tick.stdtime.gov.tw tock.stdtime.gov.tw time.stdtime.gov.tw P-2302HWUDL-P1 Series User’s Guide address if there is an HTTP proxy server between the ZyXEL Device and the DDNS server. Chapter 22 System...

  • Page 266: Resetting The Time

    Enter the new time in this field, and click Apply. Enter the new date in this field, and click Apply. Select this if you want to use a time server to update the current date and time in the ZyXEL Device. P-2302HWUDL-P1 Series User’s Guide...
  • Page 267 Enter which hour on the which day of which week of which month daylight-savings time ends. Apply Click this to save your changes and to apply them to the ZyXEL Device. Cancel Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide Chapter 22 System...
  • Page 268 Chapter 22 System P-2302HWUDL-P1 Series User’s Guide...

  • Page 269: Log

    Log" devID="<mac address>" cat="Traffic Log" duration=seconds sent=sentBytes rcvd=receiveBytes dir="<from:to>" protoID=IPProtocolID proto="serviceName" P-2302HWUDL-P1 Series User’s Guide Section 23.3 on page 273. DESCRIPTION This message is sent by the system ("RAS" displays as the system name if you haven’t configured one) when the router generates a syslog.

  • Page 270: Logs Screens

    This field lists the destination IP address and the port number of the incoming packet. In many cases, some or all of this information may not be available. This field displays additional information about the log entry. Section 23.3 on page 273. P-2302HWUDL-P1 Series User’s Guide...

  • Page 271: Log Settings Screen

    Enter the server name or the IP address of the mail server the ZyXEL Device should use to e-mail logs and alerts. Leave this field blank if you do not want to send logs or alerts by e-mail. P-2302HWUDL-P1 Series User’s Guide Chapter 23 Log...
  • Page 272 Select the categories of alerts that you want the ZyXEL Device to send immediately. Click this to save your changes and to apply them to the ZyXEL Device. Click this to set every field in this screen to its last-saved value. P-2302HWUDL-P1 Series User’s Guide...

  • Page 273: Log Message Descriptions

    Failed to sync with Time server: %s Failed to sync with NTP server: %s P-2302HWUDL-P1 Series User’s Guide DESCRIPTION The WAN connection is down. You cannot access the network through this interface. This attempt to create a NAT session exceeds the maximum number of NAT session table entries allowed to be created per host.

  • Page 274: Table 121 Access Control Logs

    UDP idle timeout: 3 minutes TCP connection (three way handshaking) timeout: 270 seconds TCP FIN-wait timeout: 2 MSL (Maximum Segment Lifetime set in the TCP header). TCP idle (established) timeout (s): 150 minutes TCP reset timeout: 10 seconds P-2302HWUDL-P1 Series User’s Guide...

  • Page 275: Table 123 Packet Filter Logs

    Opening ppp:IPCP Starting ppp:IPCP Opening P-2302HWUDL-P1 Series User’s Guide DESCRIPTION The router sent a TCP reset packet when the number of incomplete connections (TCP and UDP) exceeded the user- configured threshold. (Incomplete count is for all TCP and UDP connections through the firewall.)Note: When the number of...

  • Page 276: Table 126 Upnp Logs

    The external content filtering license key is invalid. Table 130 on page 278. DESCRIPTION The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF attack. The firewall detected an ICMP attack. The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF land attack. The firewall detected an ICMP land attack. P-2302HWUDL-P1 Series User’s Guide...

  • Page 277: Table 129 Remote Management Logs

    Table 129 Remote Management Logs LOG MESSAGE Remote Management: FTP denied Remote Management: TELNET denied P-2302HWUDL-P1 Series User’s Guide DESCRIPTION The firewall detected an IP spoofing attack on the WAN port. The firewall detected an ICMP IP spoofing attack on the WAN port.

  • Page 278: Table 130 Icmp Notes

    Redirect datagrams for the Type of Service and Network Redirect datagrams for the Type of Service and Host Echo Echo message Time Exceeded Time to live exceeded in transit Fragment reassembly time exceeded Parameter Problem Pointer indicates the error P-2302HWUDL-P1 Series User’s Guide...

  • Page 279: Table 131 Sip Logs

    LOG MESSAGE PSTN Call Start PSTN Call End PSTN Call Established P-2302HWUDL-P1 Series User’s Guide DESCRIPTION The listed SIP account was successfully registered with a SIP register server. An attempt to register the listed SIP account with a SIP register server was not successful.
  • Page 280 Chapter 23 Log P-2302HWUDL-P1 Series User’s Guide...

  • Page 281: Tools

    Only use firmware for your ZyXEL Device’s specific model. Refer to the label on the bottom of your ZyXEL Device. Figure 193 Maintenance > Tools > Firmware P-2302HWUDL-P1 Series User’s Guide in a file that (usually) uses the system model name with a Tools...

  • Page 282: Firmware Upload Screens

    Click this to begin uploading the selected file. This may take up to two minutes. Section 24.2.2 on page 282 for more information about this process. Note: Do not turn off the device while firmware upload is in progress! P-2302HWUDL-P1 Series User’s Guide...

  • Page 283: Configuration Screen

    Once your device is configured and functioning properly, it is highly recommended that you back up your configuration file before making configuration changes. The backup configuration file is useful if you need to return to your previous settings. Restore Configuration P-2302HWUDL-P1 Series User’s Guide Firmware Screen. Chapter 24 Tools...

  • Page 284: Restore Configuration Screens

    Note: Do not turn off the device while configuration file upload is in progress. Click this to clear all user-entered configuration information and return the ZyXEL Device to its factory defaults. There is no warning screen. Section 24.2.4 on page P-2302HWUDL-P1 Series User’s Guide...

  • Page 285: Restart Screen

    This does not affect the ZyXEL Device’s configuration. When you click Restart, the following screen appears. Figure 202 Maintenance > Tools > Restart > In Progress Wait one minute for the device to finish restarting. Then, you can log in again. P-2302HWUDL-P1 Series User’s Guide Configuration Screen. Chapter 24 Tools...
  • Page 286 Chapter 24 Tools P-2302HWUDL-P1 Series User’s Guide...

  • Page 287: Troubleshooting

    3 Inspect your cables for damage. Contact the vendor to replace any damaged cables. 4 Disconnect and re-connect the power adaptor to the ZyXEL Device. 5 If the problem continues, contact the vendor. P-2302HWUDL-P1 Series User’s Guide Troubleshooting Section 1.4 on page...

  • Page 288: Zyxel Device Access And Login

    Appendix B on page 301. (Section 7.1.7 on page 114), make sure your computer is in the Appendix D on page 315. Your ZyXEL Device is a DHCP Appendix D on page P-2302HWUDL-P1 Series User’s Guide Section 2.3 Section 2.3 315.

  • Page 289: Internet Access

    Quick Start Guide and 2 Disconnect and re-connect the power adaptor to the ZyXEL Device. 3 Turn the ZyXEL Device off and on. P-2302HWUDL-P1 Series User’s Guide Section 2.3 on page Section 1.4 on page Section 1.4 on page Chapter 25 Troubleshooting Section 2.3...

  • Page 290: Phone Calls And Voip

    The ZyXEL Device fails to detect my USB device. 1 Disconnect the USB device. 2 Reboot the ZyXEL Device. 140. The PHONE 1 or PHONE 2 LED should be on when the SIP line is Section P-2302HWUDL-P1 Series User’s Guide...
  • Page 291 3 If you are connecting a USB hard drive that comes with an external power supply, make sure it is connected to an appropriate power source that is on. 4 Re-connect your USB device to the ZyXEL Device. P-2302HWUDL-P1 Series User’s Guide...
  • Page 292 Chapter 25 Troubleshooting P-2302HWUDL-P1 Series User’s Guide...

  • Page 293: Part Vii: Appendices And Index

    Appendices and Index Product Specifications (295) Pop-up Windows, JavaScripts and Java Permissions (301) IP Addresses and Subnetting (307) Setting up Your Computer’s IP Address (315) SIP Passthrough (329) Internal SPTGEN (331) Services (347) Legal Information (351) Customer Support (355) Index (359)

  • Page 295: Specification Tables

    USB Ports File Systems Supported for File Sharing Operation Temperature Storage Temperature Operation Humidity Storage Humidity P-2302HWUDL-P1 Series User’s Guide 192.168.1.1 255.255.255.0 (24 bits) 1234 147.5 x 56.5 x 215.5 mm 464 g One RJ-45, 10/100Mbps Half / Full Auto-negotiation, Auto-crossover...

  • Page 296: Table 137 Firmware Features

    DNS servers to computers on your network. With Dynamic DNS (Domain Name System) support, you can use a fixed URL, www.zyxel.com for example, with a dynamic IP address. You must register for this service with a Dynamic DNS service provider. P-2302HWUDL-P1 Series User’s Guide...

  • Page 297: Table 138 Feature Specifications

    (UPnP) Table 138 Feature Specifications Voice Functions DECT Base Station P-2302HWUDL-P1 Series User’s Guide DESCRIPTION IP Multicast is used to send traffic to a specific group of computers. The ZyXEL Device supports versions 1 and 2 of IGMP (Internet Group Management Protocol) used to join multicast groups (see RFC 2236).

  • Page 298: Table 139 Zyxel Device Power Adaptor Specifications

    Web page blocking by URL keyword. Port Forwarding 2048 NAT sessions Multimedia application. PPTP under NAT/SUA. IPSec passthrough SIP ALG passthrough. 8 IP AA-161A AC 120Volts/60Hz/26W max AC 16Volts/1.0A 15 Watt Max. UL, CUL (ANSI/UL 1310,CAN/CSA-C22.2 No. 223) AA-161ABN AC 230Volts/50Hz/140mA P-2302HWUDL-P1 Series User’s Guide...
  • Page 299 Safety Standards AUSTRALIA AND NEW ZEALAND PLUG STANDARDS AC Power Adapter Model Input Power Output Power Power Consumption Safety Standards P-2302HWUDL-P1 Series User’s Guide Appendix A Product Specifications AC 16Volts/1.0A 15 Watt Max. ITS-GS, CE (EN 60950-1) AA-161AD AC 240Volts/50Hz/140mA AC 16Volts/1.0A...
  • Page 300 Appendix A Product Specifications P-2302HWUDL-P1 Series User’s Guide...

  • Page 301: Internet Explorer Pop-Up Blockers

    1 In Internet Explorer, select Tools, Pop-up Blocker and then select Turn Off Pop-up Blocker. Figure 203 Pop-up Blocker You can also check if pop-up blocking is disabled in the Pop-up Blocker section in the Privacy tab. 1 In Internet Explorer, select Tools, Internet Options, Privacy. P-2302HWUDL-P1 Series User’s Guide...

  • Page 302: Figure 204 Internet Options: Privacy

    Alternatively, if you only want to allow pop-up windows from your device, see the following steps. 1 In Internet Explorer, select Tools, Internet Options and then the Privacy tab. 2 Select Settings…to open the Pop-up Blocker Settings screen. P-2302HWUDL-P1 Series User’s Guide...

  • Page 303: Figure 205 Internet Options: Privacy

    3 Type the IP address of your device (the web page that you do not want to have blocked) with the prefix “http://”. For example, http://192.168.167.1. 4 Click Add to move the IP address to the list of Allowed sites. Figure 206 Pop-up Blocker Settings P-2302HWUDL-P1 Series User’s Guide Appendix B Pop-up Windows, JavaScripts and Java Permissions...

  • Page 304: Figure 207 Internet Options: Security

    3 Scroll down to Scripting. 4 Under Active scripting make sure that Enable is selected (the default). 5 Under Scripting of Java applets make sure that Enable is selected (the default). 6 Click OK to close the window. P-2302HWUDL-P1 Series User’s Guide...

  • Page 305: Java Permissions

    3 Scroll down to Microsoft VM. 4 Under Java permissions make sure that a safety level is selected. 5 Click OK to close the window. Figure 209 Security Settings - Java P-2302HWUDL-P1 Series User’s Guide Appendix B Pop-up Windows, JavaScripts and Java Permissions...

  • Page 306: Figure 210 Java (Sun)

    1 From Internet Explorer, click Tools, Internet Options and then the Advanced tab. 2 Make sure that Use Java 2 for <applet> under Java (Sun) is selected. 3 Click OK to close the window. Figure 210 Java (Sun) P-2302HWUDL-P1 Series User’s Guide...

  • Page 307: Introduction To Ip Addresses

    Therefore, each octet has a possible range of 00000000 to 11111111 in binary, or 0 to 255 in decimal. The following figure shows an example IP address in which the first three octets (192.168.1) are the network number, and the fourth octet (16) is the host ID. P-2302HWUDL-P1 Series User’s Guide...

  • Page 308: Subnet Masks

    For example, an “8-bit mask” means that the first 8 bits of the mask are ones and the remaining 24 bits are zeroes. OCTET: OCTET: OCTET: (192) (168) 11000000 10101000 00000001 11111111 11111111 11111111 11000000 10101000 00000001 P-2302HWUDL-P1 Series User’s Guide 4TH OCTET 00000010 00000000 00000010...

  • Page 309: Table 141 Subnet Masks

    The following table shows some possible subnet masks using both notations. Table 143 Alternative Subnet Mask Notation ALTERNATIVE SUBNET MASK NOTATION 255.255.255.0 255.255.255.128 P-2302HWUDL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting 4TH OCTET OCTET OCTET 00000000 00000000 00000000...

  • Page 310: Figure 212 Subnetting Example: Before Subnetting

    The following figure shows the company network after subnetting. There are now two sub- networks, A and B. ALTERNATIVE LAST OCTET NOTATION (BINARY) 1100 0000 1110 0000 1111 0000 1111 1000 1111 1100 LAST OCTET (DECIMAL) P-2302HWUDL-P1 Series User’s Guide...

  • Page 311: Figure 213 Subnetting Example: After Subnetting

    IP Address (Binary) Subnet Mask (Binary) Subnet Address: 192.168.1.0 Broadcast Address: 192.168.1.63 P-2302HWUDL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting - 2 or 62 hosts for each subnet (a host ID of all NETWORK NUMBER 192.168.1. 11000000.10101000.00000001. 11111111.11111111.11111111.

  • Page 312: Table 145 Subnet 2

    Highest Host ID: 192.168.1.190 NETWORK NUMBER 192.168.1. 11000000.10101000.00000001. 11111111.11111111.11111111. Lowest Host ID: 192.168.1.193 Highest Host ID: 192.168.1.254 LAST FIRST ADDRESS ADDRESS P-2302HWUDL-P1 Series User’s Guide LAST OCTET BIT VALUE 01000000 11000000 LAST OCTET BIT VALUE 10000000 11000000 LAST OCTET BIT...

  • Page 313: Table 149 24-Bit Network Number Subnet Planning

    The following table is a summary for subnet planning on a network with a 16-bit network number. Table 150 16-bit Network Number Subnet Planning NO. “BORROWED” HOST BITS P-2302HWUDL-P1 Series User’s Guide Appendix C IP Addresses and Subnetting LAST FIRST ADDRESS ADDRESS SUBNET MASK NO.

  • Page 314: Configuring Ip Addresses

    For more information on address assignment, please refer to RFC 1597, Address Allocation for Private Internets and RFC 1466, Guidelines for Management of IP Address Space. SUBNET MASK NO. SUBNETS 255.255.255.252 (/30) 16384 255.255.255.254 (/31) 32768 P-2302HWUDL-P1 Series User’s Guide NO. HOSTS PER SUBNET...

  • Page 315: Appendix D Setting Up Your Computer's Ip Address

    After the appropriate TCP/IP components are installed, configure the TCP/IP settings in order to “communicate” with your network. Windows 95/98/Me Click Start, Settings, Control Panel and double-click the Network icon to open the Network window. P-2302HWUDL-P1 Series User’s Guide Address...

  • Page 316: Installing Components

    2 Select Client and then click Add. 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click 5 Restart your computer so the changes you made take effect. P-2302HWUDL-P1 Series User’s Guide...

  • Page 317: Figure 215 Windows 95/98/Me: Tcp/Ip Properties: Ip Address

    • If you do not know your DNS information, select Disable DNS. • If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in). P-2302HWUDL-P1 Series User’s Guide Appendix D Setting up Your Computer’s IP Address...

  • Page 318: Verifying Settings

    3 Select your network adapter. You should see your computer's IP address, subnet mask and default gateway. Windows 2000/NT/XP The following example figures use the default Windows XP GUI theme. 1 Click start (Start in Windows 2000/NT), Settings, Control Panel. P-2302HWUDL-P1 Series User’s Guide...

  • Page 319: Figure 217 Windows Xp: Start Menu

    2 In the Control Panel, double-click Network Connections (Network and Dial-up Connections in Windows 2000/NT). Figure 218 Windows XP: Control Panel 3 Right-click Local Area Connection and then click Properties. P-2302HWUDL-P1 Series User’s Guide Appendix D Setting up Your Computer’s IP Address...

  • Page 320: Figure 219 Windows Xp: Control Panel: Network Connections: Properties

    • If you have a dynamic IP address click Obtain an IP address automatically. • If you have a static IP address click Use the following IP Address and fill in the IP address, Subnet mask, and Default gateway fields. • Click Advanced. P-2302HWUDL-P1 Series User’s Guide...

  • Page 321: Figure 221 Windows Xp: Internet Protocol (Tcp/Ip) Properties

    Automatic metric check box and type a metric in Metric. • Click Add. • Repeat the previous three steps for each default gateway you want to add. • Click OK when finished. P-2302HWUDL-P1 Series User’s Guide Appendix D Setting up Your Computer’s IP Address...

  • Page 322: Figure 222 Windows Xp: Advanced Tcp/Ip Properties

    • If you know your DNS server IP address(es), click Use the following DNS server addresses, and type them in the Preferred DNS server and Alternate DNS server fields. If you have previously configured DNS servers, click Advanced and then the DNS tab to order them. P-2302HWUDL-P1 Series User’s Guide...

  • Page 323: Macintosh Os X

    Support tab. Macintosh OS X 1 Click the Apple menu, and click System Preferences to open the System Preferences window. Figure 224 Macintosh OS X: Apple Menu P-2302HWUDL-P1 Series User’s Guide Appendix D Setting up Your Computer’s IP Address...

  • Page 324: Figure 225 Macintosh Os X: Network

    • Type the IP address of your gateway in the Router address box. 5 Click Apply Now and close the window. 6 Restart your computer (if prompted). Verifying Settings Check your TCP/IP properties in the Network window. P-2302HWUDL-P1 Series User’s Guide...

  • Page 325: Using The K Desktop Environment (Kde)

    Figure 226 Red Hat 9.0: KDE: Network Configuration: Devices 2 Double-click on the profile of the network card you wish to configure. The Ethernet Device General screen displays as shown. P-2302HWUDL-P1 Series User’s Guide Appendix D Setting up Your Computer’s IP Address...

  • Page 326: Figure 227 Red Hat 9.0: Kde: Ethernet Device: General

    Figure 228 Red Hat 9.0: KDE: Network Configuration: DNS 5 Click the Devices tab. 6 Click the Activate button to apply the changes. The following screen displays. Click Yes to save the changes in all screens. P-2302HWUDL-P1 Series User’s Guide...

  • Page 327: Using Configuration Files

    2 If you know your DNS server IP address(es), enter the DNS server information in the file in the resolv.conf two DNS server IP addresses are specified. P-2302HWUDL-P1 Series User’s Guide Appendix D Setting up Your Computer’s IP Address is the name of the Ethernet card). Open the eth0...

  • Page 328: Figure 232 Red Hat 9.0: Dns Settings In Resolv.conf

    RX packets:717 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:730412 (713.2 Kb) TX bytes:1570 (1.5 Kb) Interrupt:10 Base address:0x1000 [root@localhost]# in the directory. The following /etc/rc.d/init.d [OK] [OK] [OK] [OK] [OK] MTU:1500 Metric:1 P-2302HWUDL-P1 Series User’s Guide...

  • Page 329: Signaling Session Timeout

    SIP ALG does not drop the call but blocks all voice traffic and deletes the audio session. You cannot hear anything and you will need to make a new call to continue your conversation. P-2302HWUDL-P1 Series User’s Guide SIP Passthrough...
  • Page 330 Appendix E SIP Passthrough P-2302HWUDL-P1 Series User’s Guide...

  • Page 331: The Configuration Text File Format

    10000000 = Configured 10000001 = System Name 10000002 = Location 10000003 = Contact Person’s Name 10000004 = Route IP 10000005 = Route IPX 10000006 = Bridge P-2302HWUDL-P1 Series User’s Guide Internal SPTGEN parameter values allowed <0(No)| 1(Yes)> <Str> = Your Device <Str>...

  • Page 332: Internal Sptgen Ftp Download Example

    ” sets the transfer mode to binary. ” transfers files from the ZyXEL Device to your ” is the configuration filename on the ZyXEL Device. rom-t " file using a text editor (do not use a word processor). You must leave P-2302HWUDL-P1 Series User’s Guide Figure...

  • Page 333: Figure 238 Internal Sptgen Ftp Download Example

    200 Type I OK ftp> put rom-t ftp>bye P-2302HWUDL-P1 Series User’s Guide ” file when you save it to your computer but it must rom-t ” sets the transfer mode to binary. ” file from your computer to the ZyXEL Device using the “...

  • Page 334: Example Internal Sptgen Menus

    Output device filters Set 4 INPUT <0(No) | 1(Yes)> <Str> = Your Device <Str> <Str> <0(No) | 1(Yes)> <0(No) | 1(Yes)> P-2302HWUDL-P1 Series User’s Guide INPUT = 256 = 256 = 256 = 256 = 256 = 256 = 256...
  • Page 335 30201005 = Version 30201006 = IP Alias #1 Incoming protocol filters Set 1 30201007 = IP Alias #1 Incoming protocol filters Set 2 P-2302HWUDL-P1 Series User’s Guide Appendix F Internal SPTGEN INPUT <0(None) | 1(Server) | 2(Relay)> 192.168.1.33 = 32 = 0.0.0.0...
  • Page 336 <0(None) | 1(Both) | 2(In Only) | 3(Out Only)> <0(Rip-1) | 1(Rip-2B) |2(Rip-2M)> = 256 = 256 = 256 = 256 = 256 = 256 = 256 = 256 INPUT Wireless <0(No) | 1(Yes)> <1|2|3|4|5|6| 7|8|9|10|11|1 2|13> P-2302HWUDL-P1 Series User’s Guide...

  • Page 337: Table 154 Menu 4 Internet Access Setup

    Table 154 Menu 4 Internet Access Setup / Menu 4 Internet Access Setup 40000000 = Configured 40000001 = 40000002 = Active P-2302HWUDL-P1 Series User’s Guide Appendix F Internal SPTGEN <0 ~ 2432> = 2432 <256 ~ 2432> = 2432 <0(DISABLE) |...
  • Page 338 = 0.0.0.0 = 0.0.0.0 = 256 = 256 = 256 = 256 = 256 = 256 = 256 <0(No) | 1(Yes)> <0(No) | 1(Yes)> <0(CBR) | (1 (UBR)> <0(None) | 1(Both) | 2(In Only) | 3(Out Only)> P-2302HWUDL-P1 Series User’s Guide...

  • Page 339: Table 155 Menu 12

    SUA Server #2 Protocol 150000004 = SUA Server #2 Port Start 150000005 = SUA Server #2 Port End 150000006 = SUA Server #2 Local IP address P-2302HWUDL-P1 Series User’s Guide Appendix F Internal SPTGEN <0(Rip-1) | 1(Rip-2B) |2(Rip-2M)> <0(No) |1(Yes)>...
  • Page 340 <0(No) | 1(Yes)> <0(All)|6(TCP)|17(U DP)> = 0.0.0.0 <0(No) | 1(Yes)> = <0(All)|6(TCP)|17(U DP)> = 0.0.0.0 <0(No) | 1(Yes)> <0(All)|6(TCP)|17(U = 0.0.0.0 DP)> = 0.0.0.0 <0(No) | 1(Yes)> <0(All)|6(TCP)|17(U DP)> = 0.0.0.0 <0(No) | 1(Yes)> <0(All)|6(TCP)|17(U DP)> P-2302HWUDL-P1 Series User’s Guide...

  • Page 341: Table 157 Menu 21.1 Filter Set #1

    IP Filter Set 1,Rule 1 Src IP address 210101009 = IP Filter Set 1,Rule 1 Src Subnet Mask 210101010 = IP Filter Set 1,Rule 1 Src Port P-2302HWUDL-P1 Series User’s Guide Appendix F Internal SPTGEN = 0.0.0.0 <0(No) | 1(Yes)> <0(All)|6(TCP)|17(U DP)>...

  • Page 342: Table 158 Menu 21.1 Filer Set #2

    |2(not equal)|3(less)|4( greater)> <1(check next)|2(forward)| 3(drop)> <1(check next)|2(forward)| 3(drop)> INPUT <2(TCP/IP)> <0(No)|1(Yes)> = 0.0.0.0 = 138 <0(none)|1(equal) |2(not equal)|3(less)|4( greater)> = 0.0.0.0 <0(none)|1(equal) |2(not equal)|3(less)|4( greater)> <1(check next)|2(forward)| 3(drop)> <1(check next)|2(forward)| 3(drop)> INPUT <Str> NetBIOS_WAN INPUT P-2302HWUDL-P1 Series User’s Guide...
  • Page 343 IP Filter Set 2, Rule 2 Dest Port Comp 210202008 = IP Filter Set 2, Rule 2 Src IP address 210202009 = IP Filter Set 2, Rule 2 Src Subnet Mask P-2302HWUDL-P1 Series User’s Guide Appendix F Internal SPTGEN <0(none)|2(TCP/ IP)> <0(No)|1(Yes)> = 0.0.0.0 = 137 <0(none)|1(equal)|...

  • Page 344: Table 159 Menu 23 System Menus

    <0(No) | 1(Yes)> <0(No) | 1(Yes)> 192.168.1.32 = 1822 111111111111 111111111111 1111 <0(No) | 1(Yes)> <0(No) | 1(Yes)> 192.168.1.44 = 1823 = 1234 INPUT <0(Authentication Required) |1(No Access Allowed) |2(No Authentication Required)> = 555 = 999 P-2302HWUDL-P1 Series User’s Guide...

  • Page 345: Table 160 Menu 24.11 Remote Management Control

    FTP Server Secured IP address 241100007 = WEB Server Port 241100008 = WEB Server Access 241100009 = WEB Server Secured IP address P-2302HWUDL-P1 Series User’s Guide Appendix F Internal SPTGEN <0(Local User Database Only) |1(RADIUS Only) |2(Local,RADIUS) |3(RADIUS,Local)> <0(8021x) |1(WPA) |2(WPAPSK)>...

  • Page 346: Table 161 Command Examples

    Table 161 Command Examples /ci command (for annex a): wan adsl opencmd 990000001 = ADSL OPMD /ci command (for annex B): wan adsl opencmd 990000001 = ADSL OPMD INPUT INPUT <0(glite)|1(t1.413 )|2(gdmt)|3(multim ode)> INPUT <0(etsi)|1(normal) |2(gdmt)|3(multimo de)> P-2302HWUDL-P1 Series User’s Guide...

  • Page 347: Appendix G Services

    AUTH BOOTP_CLIENT BOOTP_SERVER CU-SEEME TCP/UDP TCP/UDP TCP/UDP User-Defined (IPSEC_TUNNEL) FINGER P-2302HWUDL-P1 Series User’s Guide Services PORT(S) DESCRIPTION The IPSEC AH (Authentication Header) tunneling protocol uses this service. 5190 AOL’s Internet Messenger service. Authentication protocol used by some servers. Border Gateway Protocol.
  • Page 348 (TCP/IP or other). This is a more secure version of POP3 that runs over SSL. 1723 Point-to-Point Tunneling Protocol enables secure transfer of data over public networks. This is the control channel. P-2302HWUDL-P1 Series User’s Guide...
  • Page 349 SNMP-TRAPS TCP/UDP SQL-NET SSDP TCP/UDP STRM WORKS SYSLOG TACACS TELNET P-2302HWUDL-P1 Series User’s Guide Appendix G Services PORT(S) DESCRIPTION PPTP (Point-to-Point Tunneling Protocol) enables secure transfer of data over public networks. This is the data channel. Remote Command Service. 7070 A streaming audio service that enables real time sound over the web.
  • Page 350 Trivial File Transfer Protocol is an Internet file transfer protocol similar to FTP, but uses the UDP (User Datagram Protocol) rather than TCP (Transmission Control Protocol). 7000 A videoconferencing solution. The UDP port number is specified in the application. user- defined P-2302HWUDL-P1 Series User’s Guide...

  • Page 351: Appendix H Legal Information

    ZyXEL Communications Corporation. Published by ZyXEL Communications Corporation. All rights reserved.

  • Page 352: Fcc Radiation Exposure Statement

    Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Viewing Certifications 1 Go to http://www.zyxel.com. 2 Select your product on the ZyXEL home page to go to that product's page. P-2302HWUDL-P1 Series User’s Guide...

  • Page 353: Zyxel Limited Warranty

    Registration Register your product online to receive e-mail notices of firmware upgrades and information www.zyxel.com for global products, or at P-2302HWUDL-P1 Series User’s Guide Appendix H Legal Information www.us.zyxel.com for North American products.
  • Page 354 Appendix H Legal Information P-2302HWUDL-P1 Series User’s Guide...

  • Page 355: Appendix I Customer Support

    José, Costa Rica Czech Republic • E-mail: info@cz.zyxel.com • Telephone: +420-241-091-350 • Fax: +420-241-091-359 • Web Site: www.zyxel.cz • Regular Mail: ZyXEL Communications, Czech s.r.o., Modranská 621, 143 01 Praha 4 - Modrany, Ceská Republika P-2302HWUDL-P1 Series User’s Guide Customer Support...
  • Page 356 • Support E-mail: support@zyxel.fi • Sales E-mail: sales@zyxel.fi • Telephone: +358-9-4780-8411 • Fax: +358-9-4780 8448 • Web Site: www.zyxel.fi • Regular Mail: ZyXEL Communications Oy, Malminkaari 10, 00700 Helsinki, Finland France • E-mail: info@zyxel.fr • Telephone: +33-4-72-52-97-97 • Fax: +33-4-72-52-19-20 •...
  • Page 357 • Sales E-mail: sales@zyxel.com • Telephone: +1-800-255-4101, +1-714-632-0882 • Fax: +1-714-632-0858 • Web Site: www.us.zyxel.com • FTP Site: ftp.us.zyxel.com • Regular Mail: ZyXEL Communications Inc., 1130 N. Miller St., Anaheim, CA 92806- 2001, U.S.A. Norway • Support E-mail: support@zyxel.no • Sales E-mail: sales@zyxel.no •...
  • Page 358 Appendix I Customer Support • Web Site: www.zyxel.es • Regular Mail: ZyXEL Communications, Arte, 21 5ª planta, 28033 Madrid, Spain Sweden • Support E-mail: support@zyxel.se • Sales E-mail: sales@zyxel.se • Telephone: +46-31-744-7700 • Fax: +46-31-744-7701 • Web Site: www.zyxel.se • Regular Mail: ZyXEL Communications A/S, Sjöporten 4, 41764 Göteborg, Sweden Ukraine •...

  • Page 359: Index

    LAN and WAN and WLAN application based bandwidth classes borrowing budgeting classes P-2302HWUDL-P1 Series User’s Guide fairness-based general monitor over allotment overview priority priority-based reserving services subnet-based unused & unbudgeted...
  • Page 360 WLAN encryption key error logging Ethernet 48, 54, 103 Ethernet ports ETSI (European Telecommunications Standards Institute) Europe type call service mode P-2302HWUDL-P1 Series User’s Guide 102, 118, 261, 298 113, 117 102, 108, 112 50, 261...
  • Page 361 Foreign Exchange Office (FXO) Foreign Exchange Station (FXS) frequency, and VoIP 217, 263 FTP restrictions FXO (Foreign Exchange Office) FXS (Foreign Exchange Station) P-2302HWUDL-P1 Series User’s Guide G.168 G.168 Echo Cancellation G.711 G.711, waveform codec G.729 G.729, AbS hybrid waveform codec...
  • Page 362 Telnet. See command interface. using the command interface. See command interface. maximizing bandwidth usage Media Access Control, see MAC Message Waiting Indication, see MWI metric and WAN P-2302HWUDL-P1 Series User’s Guide 111, 114 270, 271 59, 102 207, 211...
  • Page 363 OTIST operation humidity operation temperature OTIST and wireless clients clients WLAN OTIST (One Touch Intelligent Security Technology) P-2302HWUDL-P1 Series User’s Guide OTIST (One-Touch Intelligent Security Technology) outbound proxy over allotment of bandwidth password 40, 295 changing PCM (Pulse Code Modulation)
  • Page 364 VAD Simple Network Management Protocol, see SNMP account accounts and DECT and multimedia sessions and VoIP call progression client-server protocol identities number outbound proxy proxy server redirect server register server server address servers P-2302HWUDL-P1 Series User’s Guide...
  • Page 365 DECT phones syntax conventions system name system timeout TCP/IP port telephone keys, and DTMF P-2302HWUDL-P1 Series User’s Guide text file format TFTP restrictions three-way conference time resetting 139, 297 and VoIP ToS (Type of Service) Touch Tone®...
  • Page 366 WEP encryption WEP key Wide Area Network, see WAN Windows Explorer, and file sharing wireless security OTIST WPA-PSK wizard wireless wizard setup P-2302HWUDL-P1 Series User’s Guide 101, 103 101, 105 56, 101 91, 92 255, 256...
  • Page 367 IEEE 802.1x and SSID MAC address filter 86, 97 OTIST 88, 94 RADIUS 86, 92 recommendation types of user authentication workgroup, and file sharing 252, 257 51, 93 WPA2 WPA compatible 87, 93 WPA-PSK configuration P-2302HWUDL-P1 Series User’s Guide Index...
  • Page 368 Index P-2302HWUDL-P1 Series User’s Guide...

This manual is also suitable for:

P-2302hwud-p1

Table of Contents