Wireless Features
Source Radio Address Delimiter Character
This option specifies the delimiter character to be placed between the label
data and radio address when address stamping is enabled.
Set Source Radio Address Delimiter Character
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
DEFAULT
274
This feature only applies if
sion"
on page 273 is enabled.
00 = No Delimiter Character
ENTER/EXIT PROGRAMMING MODE
"Source Radio Address Transmis-
CANCEL
Gryphon™ I GD4132/GM4102/GBT4102