ENTER/EXIT PROGRAMMING MODE
GS1 DataBar™ Expanded Set Length 1
This feature specifies one of the barcode lengths for
Length
Mode, or the first fixed length if in
barcode's data characters only. The length can be set from 1 to 74 characters.
Table 20
detailed instructions on setting this feature.
Table 20. GS1 DataBar™ Expanded Length 1 Setting Examples
STEP
ACTION
1
Desired Setting
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT GS1 DataBar™ EXPANDED LENGTH 1SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
Select GS1 DataBar™ Expanded Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Control. Length 1 is the minimum label length if in
provides some examples for setting Length 1. See
EXAMPLES
01 Character
'0' and '1'
01 = Length 1 is 1 Character
DEFAULT
GS1 DataBar™ Expanded
Fixed Length
Mode. Length includes the
07 Characters
52 Characters
'0' and '7'
'5' and '2'
CANCEL
Variable Length
page 294
for
74 Characters
'7' AND '4'
227