ENTER/EXIT PROGRAMMING MODE
Industrial 2 of 5 Set Length 2
This feature specifies one of the barcode lengths for
Control. Length 2 is the maximum label length if in
the second fixed length if in
check, data, and full-ASCII shift characters. The length does not include start/
stop characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 13
instructions on setting this feature.
Table 13. Industrial 2 of 5 Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT INDUSTRIAL 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
Select Industrial 2 of5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Fixed Length
Mode. Length includes the barcode's
07 Characters
15 Characters
'0' and '7'
Industrial 2 of 5 Length
Variable Length
Mode, or
page 295
for detailed
50 Characters
'1' and '5'
'5' AND '0'
CANCEL
189