Standard 2 Of 5 Set Length 2 - Datalogic Gryphon I GD4132 Product Reference Manual

Standard 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
Control. Length 2 is the maximum label length if in
the second fixed length if in
check and data characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 11
instructions on setting this feature.
Table 11. Standard 2 of 5 Length 2 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
184
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Fixed Length Mode. Length includes the barcode's
07 Characters 15 Characters
'0' and '7'
Gryphon™ I GD4132/GM4102/GBT4102
Standard 2 of 5 Length
Variable Length Mode, or
page 295 for detailed
50 Characters
'1' and '5' '5' AND '0'
CANCEL