Codabar Set Length 2 - Datalogic Gryphon I GD4132 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Codabar Set Length 2

This feature specifies one of the barcode lengths for
Length 2 is the maximum label length if in
fixed length if in
stop, check and data characters. The length must include at least one data
character.
The length can be set from 3 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 17
instructions on setting this feature.
Table 17. Codabar Length 2 Setting Examples
STEP ACTION
Desired Setting (and pad
1
with leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODABAR LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Codabar Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Fixed Length
provides examples for setting Length 2. See
EXAMPLES
00 Ignore This
Length
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Variable Length
Mode. The length includes the barcode's start,
07 Characters 15 Characters
'0' and '7' '1' and '5'
Codabar Length Control.
Mode, or the second
page 295 for detailed
50 Characters
'5' AND '0'
CANCEL
207