Datalogic 2 Of 5 Set Length 2 - Datalogic Gryphon I GD4132 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Datalogic 2 of 5 Set Length 2

This feature specifies one of the barcode lengths for
Control. Length 2 is the maximum label length if in
the second fixed length if in
code's check and data characters.
The length can be set from 2 to 50 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 15
instructions on setting this feature.
Table 15. Datalogic 2 of 5 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT DATALOGIC 2 OF 5 LENGTH 2 SETTING
Scan Two Characters From
5
Appendix D, Keypad
6 Scan ENTER/EXIT PROGRAMMING MODE
Select Datalogic 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
provides examples for setting Length 2. See
EXAMPLES
Ignore This
Length
00
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Fixed Length Mode. The length includes the bar-
4 Characters 14 Characters
04
'0' and '4'
Datalogic 2 of 5 Length
Variable Length Mode, or
page 295 for detailed
50 Characters
14 50
'1' and '4' '5' AND '0'
CANCEL
197