Code 11 Set Length 1 - Datalogic Gryphon I GD4132 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Code 11 Set Length 1

This feature specifies one of the barcode lengths for
Length 1 is the minimum label length if in
fixed length if in
data characters. The length can be set from 2 to 50 characters.
Table 18
detailed instructions on setting this feature.
Table 18. Code 11 Length 1 Setting Examples
STEP ACTION
Desired Setting (pad with
1
leading zeroes)
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 11 LENGTH 1 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 11 Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
02 Characters
'0' and '2'
04 = Length 1 is 4 Characters
DEFAULT
Variable Length
Mode. Length includes the barcode's check and
07 Characters 15 Characters
'0' and '7' '1' and '5'
Code 11 Length Control.
Mode, or the first
page 294 for
50 Characters
'5' AND '0'
CANCEL
217