Connecting The Base Station - Datalogic Gryphon I GD4132 Product Reference Manual

Connecting the Base Station

Figure 7 shows how to connect the Base Station to a terminal, PC or other host
device. Turn off the host before connection and consult the manual for that
equipment (if necessary) before proceeding. Connect the interface cable before
applying power to the Base Station.
Base Station Connection and Routing:
F) Cable connectors into their respective ports in the underside of the Base Sta-
tion (see Figure 7). Then connect to an AC Adapter, and plug the AC power cord
into the (wall) outlet.
Figure 7. Connecting the Base Station
Product Reference Guide
The Gryphon GBT4102 can be set up to require a PIN code when connecting to
the host. To connect to a system that uses a custom security PIN, follow the
Connecting the Base when Security Pin is Enabled" on
procedure in "
page 26
. For information on how to configure this feature, see
Mode, starting on page 278
Gryphon Mobile can also be Powered by the Terminal. The external power sup-
ply is recommended but not necessary. When powered by the Terminal, the
battery charger is automatically set as Slow charge.
For some specific interfaces or hosts or lengths of cable, the use of an exter-
nal power supply may be recommended for full recharging capability (see
Technical Specifications, starting on page 315
"
I/F Cable
Base
Station
Configuring the Base Station
.
Fully insert the Power Cable and Interface (I/
Wall plug
Connector
AC/DC
Adapter
DC Power
Cord
BT Security
" for more details).
23