USB-OEM Device Usage
The USB-OEM protocol allows for the reader to be identified as one of two dif-
ferent types of barcode scanners. Depending on what other scanners you may
already have connected to a USB-OEM POS, you may need to change this setting
to enable all devices to communicate.
Options are:
• Table Top Scanner
• Handheld Scanner
USB-OEM Device Usage = Handheld Scanner
Interface Options
This feature provides for an interface-specific control mechanism.
Ignore Scanner Configuration Host Commands
70
It may be necessary to switch device usage when connecting
two readers/scanners of the same type to a POS system.
USB-OEM Device Usage = Table Top Scanner
Obey Scanner Configuration Host Commands
Gryphon™ I GD4132/GM4102/GBT 4102
ENTER/EXIT PROGRAMMING MODE
DEFAULT
DEFAULT