Intercode Delay; Intercode Delay - Datalogic Gryphon I GD4132 Product Reference Manual

ENTER/EXIT PROGRAMMING MODE

Intercode Delay

Specifies the delay between labels transmitted to the host for this interface. The
selectable range for this feature is from 0 to 99 seconds.
See page 293
this feature.
Set Intercode Delay
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
in "References" for detailed information and examples for setting
00 = No Wedge Intercode Delay
DEFAULT
CANCEL
65