Power On Alert
Disables or enables the indication (from the Beeper) that the reader is receiving
power.
Power On Alert = Four Beeps
Good Read: When to Indicate
This feature specifies when the reader will provide indication (beep and/or flash
its green LED) upon successfully reading a barcode. .
DEFAULT
Indicate Good Read = After Transmit
100
LED AND BEEPER INDICATORS
This option, which uses CTS, is only valid for RS-232 interfaces.
This item is not configurable for the GM4102/GBT 4102 models.
ENTER/EXIT PROGRAMMING MODE
Power On Alert = Disable (No Audible Indication)
DEFAULT
Indicate Good Read = After Decode
Indicate Good Read = After CTS Goes Inactive, Then Active
Gryphon™ I GD4132/GM4102/GBT4102