ENTER/EXIT PROGRAMMING MODE
Code 128 Set Length 2
This feature specifies one of the barcode lengths for
Length 2 is the maximum label length if in
fixed length if in
acters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to ignore
this length (only one fixed length).
Table 5
instructions on setting this feature.
Table 5. Code 128 Length 2 Setting Examples
STEP
ACTION
1
Desired Setting
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT CODE 128 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5
Scan ENTER/EXIT PROGRAMMING MODE
.
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Fixed Length
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
80 = Length 2 is 80 Characters
DEFAULT
Variable Length
Mode. Length includes the barcode's data char-
07 Characters
15 Characters
'0' and '7'
'0' and 'F'
Code 128 Length
Control.
Mode, or the second
page 295
for detailed
80 Characters
'5' AND 0'
CANCEL
161