I 2 Of 5 Set Length 1 - Datalogic Gryphon I GD4132 Product Reference Manual

I 2 of 5 Set Length 1

This feature specifies one of the barcode lengths for
Length 1 is the minimum label length if in
fixed length if in
and data characters. The length can be set from 2 to 50 characters in incre-
ments of two.
Table 8
detailed instructions on setting this feature.
Table 8. I 2 of 5 Length 1 Setting Examples
STEP ACTION
1 Desired Setting
Pad with leading zeroes to
2
yield two digits
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT I 2 of 5 LENGTH 1 SETTING
Scan Two Characters From
5
Appendix D, Keypad
6 Scan ENTER/EXIT PROGRAMMING MODE
Select I 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort
and not save the entry string. You can then start again
at the beginning.
176
Fixed Length
provides some examples for setting Length 1. See
EXAMPLES
2 Characters
02
'0' and '2'
06 = Length 1 is 6 Characters
DEFAULT
ENTER/EXIT PROGRAMMING MODE
Variable Length
Mode. The length includes the barcode's check
6 Characters 14 Characters
06
'0' and '6' '1' and '4'
Gryphon™ I GD4132/GM4102/GBT4102
I 2 of 5 Length Control.
Mode, or the first
page 294 for
50 Characters
14 50
'5' AND '0'
CANCEL