Scanning Features; Scan Mode - Datalogic Gryphon I GD4132 Product Reference Manual

References

Scanning Features

Scan Mode

This mode is associated with typical handheld reader operation. Selects the
scan operating mode for the reader. The following selections are valid for all
models:
Trigger Single:
following occurs:
Trigger Hold Multiple:
scans until the trigger is released or
a label does not disable scanning.
multiple reads of the same label while in this mode.
Trigger Pulse Multiple:
vated until
and pulled again.
the same label while in this mode.
Flashing:
rate is controlled by
imager reads continuously; when Flash is OFF scanning is deactivated.
Always On:
on. If the trigger is pulled, the reader acts as if it is in Trigger Single Mode.
Double Read Timeout
in this mode.
Stand Mode:
automatically when an item is placed in the reader's field of view. If the trigger
is pulled, the reader acts as if it in single read mode.
vents undesired multiple reads while in this mode.
Trigger Object Sense:
pull is required to activate the decoder.
1. Controlled by
306
When the trigger is pulled, scanning is activated until one of the
Scanning Active Time
-
- a label has been read
- the trigger is released
When the trigger is pulled, scanning starts and the product
When the trigger is pulled, continuous scanning is acti-
Scanning Active Time
Double Read Timeout
The reader flashes
Flash On Time
Flashing is the recommended scan mode for Gryphon L hands-free
(stand mode) of operation
No trigger pull is required to read a barcode. Scanning is continually
prevents undesired multiple reads of the same label while
No trigger pull is required to read a barcode. Scanning is turned on
This mode is similar to Stand Mode, except that a trigger
Flash On Time
has elapsed
Scanning Active Time
Double Read Timeout
has elapsed or the trigger has been released
prevents undesired multiple reads of
1
on and off regardless of the trigger status. Flash
and Flash Off
.
Gryphon™ I GD4132/GM4102/GBT4102
has elapsed. Reading
prevents undesired
Time. When Flash is ON the
Double Read Timeout pre-