Datalogic 2 Of 5 Set Length 1 - Datalogic QuickScan Lite QW2400 Product Reference Manual

Enter/Exit Programming Mode

Datalogic 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
on page 154
Mode. The length includes the bar code's data characters only.
The length can be set from 2 to 50 characters in increments of two. See
Length 1"
Select Datalogic 2 of 5 Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
160
159. Length 1 is the minimum label length if in
Mode, or the first fixed length if in
on page 257 for more detailed programming instructions.
$CD2L1
06 = Length 1 is 6 Characters
DEFAULT
Datalogic 2 of 5 Length
Fixed Length on page 154
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from
the Alphanumeric characters in
pad
representing your desired character(s). End by
scanning the ENTER/EXIT bar code again.
CANCEL
Datalogic 2 of 5
Variable Length
"Set
Appendix D, Key-
~
QuickScan™ Lite QW2400