DATALOGIC 2 OF 5
Datalogic 2 of 5 Set Length 1
This feature specifies one of the bar code lengths for "
page 182
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters. The length can be set from 2 to 50 characters in increments of two. See "
Length 1" on page 341
Select Datalogic 2 of 5 Length 1 Setting
$CD2L1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
Datalogic 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for "
page 182
ond fixed length if in Fixed Length Mode. The length includes the bar code's check and
data characters. The length can be set from 2 to 50 characters. A setting of 00 specifies
to ignore this length (only one fixed length). See "
detailed programming instructions.
Select Datalogic 2 of 5 Set Length 2 Setting
$CD2L2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
. Length 1 is the minimum label length if in Variable Length Mode, or the first
for more detailed programming instructions.
Length 1 = 06 (6 characters)
. Length 2 is the maximum label length if in Variable Length Mode, or the sec-
Length 2 = 50 (50 characters)
ENTER/EXIT PROGRAMMING MODE
Datalogic 2 of 5 Length Control" on
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix G, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
Datalogic 2 of 5 Length Control" on
Set Length 2" on page 342
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix G, Keypad
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.
CANCEL
PRODUCT REFERENCE GUIDE
Set
represent-
for more
represent-
183