Hardware Specifications - Renesas QB-RL78D1A2 User Manual

QB-RL78D1A2 In-Circuit Emulator

1.1 Hardware Specifications

Parameter
Target device
Operating voltage
Operating
Main High-speed
frequency system system clock
clock oscillator
Note1
High-speed
on-chip oscillator
Low-speed on-chip oscillator
Subsystem clock oscillator
PLL
Operating temperature range
Storage temperature range
External dimensions
Power
Target system power supply
consumption
Weight
Host interface
Note1 Errors are within ±0.05%. However, this does not apply to errors of the oscillator or clock system
on the target board.
Note2 Errors are within ±0.004%. However, this does not apply to errors of the oscillator or clock
system on the target board.
Note3 Does not include projection of power switch
Note4 Includes projection of screw that fixes rear space adapter
Note5 Rear space adapter can adjust the height from 30 mm (longest) to 0 mm (shortest)
Note6 Front space adapter can adjust the height from 20 mm (longest) to 5 mm (shortest)
Note7 Use within voltage-range of the target device.
R20UT3110EJ0101 Rev.1.01
Nov 28, 2014
Table 1-1. QB-RL78D1A2 Hardware Specifications
R5F10DSL,R5F10DSK,R5F10DSJ,R5F10DPL,R5F10DPK
2.4V to 5.5V
Note7
2.7V ≤ VDD ≤ 5.5V：1～20 MHz
2.4V ≤ VDD < 2.7 V：1～8 MHz
2.7V ≤ VDD ≤ 5.5V：4～32MHz
2.4V ≤ VDD < 2.7 V：4～24 MHz
2.4 V ≤ VDD ≤ 5.5V: 15 KHz
2.4 V ≤ VDD ≤ 5.5V: 32.768 KHz
Note2
2.7 V ≤ VDD ≤ 5.5V: 32MHz
2.4V ≤ VDD < 2.7 V：24 MHz
0 to 40°C (No condensation)
−15 to 60°C (No condensation)
See figure below
Current: approx. 55 mA MAX
Approx. 400 g
USB interface (1.1, 2.0)
Note3
112mm
CHAPTER 1 GENERAL
Specification
Note4
108mm
67mm
Rear space adapter
Note6
Front space adapter
Note5
Page 8 of 41